Home Forums Hunting & Shooting Deer Hunting Pump Rifles and deer

It’s great this thread is still going. My 7600 270 took a doe and 6 pointer last fall.

I'd like to know if anyone has seen a new one with the straight comb as well. Want to get a 2nd 7600 and put a Williams Peep on it.

Just buy a used one.

Sent you a PM

My son in law has a couple Remington pump 270’s. He really likes them.

ok, the local smith I was going to use is over two months out.

I need the barrel cut down on a 7600 and possibly cerakoting.

Any recommendations?

Randy I wish I could help. I don’t know where you are and the GOOD g s I used to use has passed away. He was local and I miss him.
Good Luck


Jerry

Hill billy rifles I believe could help you.

https://m.facebook.com/HillbillyCustomRifles/

Randy, Yes, Nathan could do this. Give him a call. PM sent also with a more local option.

I bought this 7600 in 260 Rem a couple years ago, but haven't fired it yet!


Rem 760 in 300 Savage:


Rem 7600 Carbine in 30-06:

Couple beauties there!!

I don't do links, but Dugan's Custom Guns in Port Matilda Pa. has a 760 carbine in 30-06 that appears unfired. 1968 manufacture.

$745 (814) 571-0967

Don't know if that's a good number, but it's not easy to get that rifle in that condition.

I’ve killed a few with my grandpaw’s 7600 .308 pump and killed an 8 pt with friend’s 7600 .270. My first deer rifle was a 7400 jamamatic .243 and I killed a boatload of deer with it. My uncle had a browning bar safari .270 auto that has killed more deer than about any gun I know of.

[quote=lugnut1981]I’ve killed a few with my grandpaw’s 7600 .308 pump and killed an 8 pt with friend’s 7600 .270. My first deer rifle was a 7400 jamamatic .243 and I killed a boatload of deer with it. My uncle had a browning bar safari .270 auto that has killed more deer than about any gun I know of.[/quot



Had me believing it intill the 270! You can't kill a deer with a 270!!!!!

Shot my buddy's 760 ADL in .35 rem about a week ago.
Junk scope.
Off the bench (elbows only) I put 3 into same hole at 25 yards.
Yeah that aint much.......but I was doing good that day so kinda sorta says the rifle is decent.
If I don't buy a Ruger #1 this week, I'll snag the 760.

Love the 300

I have a 1974 +/- 760 in 30-06 that the plastic ejection port cover has worn out on. Anyone know how to replace it, or know a web video showing how?

Remove the fore end. The action tube has 4 holes through it. Clamp the action in a padded vice and put a punch through the holes and twist the action tube off of the screw that holds is. You may need to heat the action tube to break the thread locking agent bond. Pull the action tube out of the action bar assembly and replace the O-ring while you have the rifle apart.

Mr Dave is correct. May is the operative word. I’ve disassembled several and so far I have NOT had to use heat.

I have the Brownell’s tool for disass. I have used a short 2x4 to jar it loose.

It really isn’t complicated. Good luck.

Jerry

Thank you, gentlemen. I will give it a shot, I've had the replacement cover for a while now, just need to find some time to sit down and get 'er done.