Home Forums Hunting & Shooting Hunting Optics Buehler Scope Rings/Bases, where are they? How to find?!!

I would be interested in #8 highs. Reply if available please.

I may have some rings, I will 👀 look

Coming in late, but I'm here. .. I am seriously needing 30mm high rings for my Buehler base. I have a 50mm objective lens that I hope/believe the high rings will elevate enough. Can anyone help?

Could anyone tell me which model fits the 98 / FN Mauser or the small ring 98?

I guess I junked the Buehlers I had.

I still have one set, I will dig them out.

I know the Ruger # 3 bases are a no go but might not hurt to check with Weatherby if you need rings they might have some left it's worth a call

Ok ladies and gentlemen let me revise an old thread and see if I can help out! I have the following available and more to come that’s just not listed yet (a lot on buehler 2 pcs mounts and about a dozen 1 pcs I don’t know what there for!)
Any idea on the buehler codes or the ones with no info would be great! If you know what code you need let me know! I will have 4-6 rings available DOWN THE ROAD!
$20-30.00 per mount? Shipped? Seems fair for the Buehler’s all the others jus let me know if your interested PICS TO COME IN THE NEXT DAY OR TWO!

BUELHER SCOPE MOUNT
ONE PCS BASES:
K- SW K FRAME
RB- Ruger Blackhawk
60- m760/742/740
C- colt python
RA- Ruger 22 auto
A3S- Springfield A3 ”short base”
SM- side mount
70- short action Winchester 70 (x2)
21- rem 700 /725 wthby MK V
FN-
88-
52-
Hk-
BS-
SDT-2pcs ( sako??)
BL-
AN

REDFIELD BASE MOUNTS
ONE PCS BASES:
‘760’- rem 760/742/740
700LL-
M4A-
BBR- browning (BAR?)
70-A- pre 64 m70 win

WILLIAMS SCOPE MOUNT:
Rem 760

SPRINGFIELD 03A3:
Redfield SA3 adjustable
(X2) Lyman 48s bases (1) Lyman 30 adjustable sigh
(1)Lyman B61 adjustable sight
Pachmyer lo-swing Springfield mount (I assume 03a3 as well)
Leupold detatcho’s

& one set of weaver split rings!

Bump... no body needs/wants a new scope base?

I have an ad on the campfire for NIB Buehler bases and rings with screws for a Python.

can someone explain to me the "shim" element? In an enthusiastic fit I picked up a set of Buehler bases and rings for a pre-64 Winchester model 70, but my gunsmith was not high on using them. He specifically cited the need for shims. I do like the clean look though. Are the shims an extra part made by Buehler that I need to find (I only have bases and rings)? thanks

[quote=BillC_sbio]I have a couple of rifles that have their scopes mounted using Buehler Scope Bases and Rings.

Probably for many here, they're not going to be too familiar with these, but 20+ years ago, they were a highly respected small manufacturer of Rings and Bases down in the S.F. Bay Area.

They're a very "streamlined" shaped ring that are vertically split, but use an "adjustable" shim in them so there's no opening split on the top.

Anyway, because of this shim, unless a scope is almost exactly the SAME tube dia. as the next (and most aren't that close) a new shim, or rings, has be be obtained when switching scopes.

I found lots of rings and bases on e bay, but was never able to find the shims for these. Lots of Weatherby bases which are the same as Remington 700, mostly high rings, but beware the highs are really high. Lows which are rarer are about right for 40mm scope. I've got a set that is shimmed on my Model 70 from the 60's.. Shimming was done by tightening the ring on the scope with various shims in place and then measuring the bottom half of the split ring to determine the proper shim. I used to have the instructions but can't find now. The shim as far as I can tell just closed the gap at the top split ring.

I'd like to buy your Beuhler bases for my Weatherby Mk V rifle, in 300 Wby mag. I'm new here, so having difficulty moving around on the site. I am in Kingston, Ontario, Canada. My email is triggermortisbell.net, phone is 343-363-2267.