|
|
Joined: Feb 2018
Posts: 1,885 Likes: 1
Campfire Regular
|
OP
Campfire Regular
Joined: Feb 2018
Posts: 1,885 Likes: 1 |
I am thinking about getting a set of the Redding Competition shell holders for my two 6.5 Creedmoor's. If any of you are using them please share your thoughts.
|
|
|
|
Joined: Jun 2004
Posts: 44,869 Likes: 5
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,869 Likes: 5 |
What causes this thought?
|
|
|
|
Joined: Feb 2018
Posts: 1,885 Likes: 1
Campfire Regular
|
OP
Campfire Regular
Joined: Feb 2018
Posts: 1,885 Likes: 1 |
I am thinking I could just change out the shell holder and not readjust the sizing die for each rifle. Is this wrong thinking? I am loading with a Redding T-7.
|
|
|
|
Joined: Jun 2004
Posts: 44,869 Likes: 5
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,869 Likes: 5 |
As long as the die is able to size enough (or too much) for the shorter chamber when using a standard shell holder then you can get this idea working. These shell holders come in increments of increased height, which means increments of less sizing.
|
|
|
|
Joined: Jul 2001
Posts: 60,166 Likes: 13
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,166 Likes: 13 |
While I have found the Redding Competition shell holders I got for the .223 many years ago quite useful when loading for our several .223/5.56 rifles, I also use more than one turret die--for a couple of reasons. Each requires a slight "adjustment" in dies, which is often more than the shell holders provide.
The Brownells shim kit is fine, but I also eventually found a variety of washers at a local hardware store that augmented the shims.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
660 members (16gage, 12344mag, 117LBS, 160user, 10gaugeman, 10gaugemag, 71 invisible),
2,933
guests, and
1,284
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,736
Posts18,495,001
Members73,977
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|