|
Joined: Jul 2007
Posts: 15,867 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2007
Posts: 15,867 Likes: 6 |
Pretty much what it would be used for. Mount a scope, sight it in, practice a bit with it...leave it.
You just described a Tikka T3.
THE CHAIR IS AGAINST THE WALL. The Tikka T3 in .308 Winchester is the Glock 19 of the rifle world. The website is up and running!www.lostriverammocompany.com
|
|
|
|
Joined: Oct 2016
Posts: 1,688
Campfire Regular
|
Campfire Regular
Joined: Oct 2016
Posts: 1,688 |
They have a good barrel and that's where it ends IME! My brother picked one up and it didn't feed for [bleep], needed bedded/most Brownings come bedded not the AB3. Also worked on the trigger. I didn't bed the tang because the trigger mechanics are all in that area and there just isn't room IMO.
In the end after bedding the recoil lug area, working on the trigger, and grinding and polishing the feed ramp we got the rifle from 1 1/2" groups at 100 yds to 3" 3 shot groups at 500 yds. Like I said great barrel and the rest needs work! I personally wouldn't want one but probably because I'm used to Tikka's where it all works very well right out of the box
Trystan
You and I have different experiences with the Tikka. You don't like plastic mags but you like the tikka? Or you just don't like the browning plastic mag? All the one's I've seen were display models so the mag was not in the gun. I didn't say I don't like plastic mags. I said I didn't like the way the Browning AB3 feeds but that is due to the feed ramp needing work not the plastic mag.
Good bullets properly placed always work, but not everyone knows what good bullets are, or can reliably place them in the field
|
|
|
|
Joined: Oct 2016
Posts: 1,688
Campfire Regular
|
Campfire Regular
Joined: Oct 2016
Posts: 1,688 |
They have a good barrel and that's where it ends IME! My brother picked one up and it didn't feed for [bleep], needed bedded/most Brownings come bedded not the AB3. Also worked on the trigger. I didn't bed the tang because the trigger mechanics are all in that area and there just isn't room IMO.
In the end after bedding the recoil lug area, working on the trigger, and grinding and polishing the feed ramp we got the rifle from 1 1/2" groups at 100 yds to 3" 3 shot groups at 500 yds. Like I said great barrel and the rest needs work! I personally wouldn't want one but probably because I'm used to Tikka's where it all works very well right out of the box
Trystan
You and I have different experiences with the Tikka. You don't like plastic mags but you like the tikka? Or you just don't like the browning plastic mag? All the one's I've seen were display models so the mag was not in the gun. I didn't say I don't like plastic mags. I said I didn't like the way the Browning AB3 feeds but that is due to the feed ramp needing work not the plastic mag. Trystan, What did you do to your trigger? Did you get one of those spring kits for a lighter pull? I got one of those myself and I’m still trying to decide if it helped. Frank
I polished the sear down to get rid of some creep and and smooth it up a bit more.
Last edited by Trystan; 10/24/19.
Good bullets properly placed always work, but not everyone knows what good bullets are, or can reliably place them in the field
|
|
|
|
Joined: Feb 2004
Posts: 46,745
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Feb 2004
Posts: 46,745 |
They have a good barrel and that's where it ends IME! My brother picked one up and it didn't feed for [bleep], needed bedded/most Brownings come bedded not the AB3. Also worked on the trigger. I didn't bed the tang because the trigger mechanics are all in that area and there just isn't room IMO.
In the end after bedding the recoil lug area, working on the trigger, and grinding and polishing the feed ramp we got the rifle from 1 1/2" groups at 100 yds to 3" 3 shot groups at 500 yds. Like I said great barrel and the rest needs work! I personally wouldn't want one but probably because I'm used to Tikka's where it all works very well right out of the box
Trystan
You and I have different experiences with the Tikka. You don't like plastic mags but you like the tikka? Or you just don't like the browning plastic mag? All the one's I've seen were display models so the mag was not in the gun. I didn't say I don't like plastic mags. I said I didn't like the way the Browning AB3 feeds but that is due to the feed ramp needing work not the plastic mag. Lol...breathe dude. I wasn't accusing you. I was asking you if you just didn't like the browning mags.
Camp is where you make it.
|
|
|
|
Joined: Oct 2016
Posts: 1,688
Campfire Regular
|
Campfire Regular
Joined: Oct 2016
Posts: 1,688 |
They have a good barrel and that's where it ends IME! My brother picked one up and it didn't feed for [bleep], needed bedded/most Brownings come bedded not the AB3. Also worked on the trigger. I didn't bed the tang because the trigger mechanics are all in that area and there just isn't room IMO.
In the end after bedding the recoil lug area, working on the trigger, and grinding and polishing the feed ramp we got the rifle from 1 1/2" groups at 100 yds to 3" 3 shot groups at 500 yds. Like I said great barrel and the rest needs work! I personally wouldn't want one but probably because I'm used to Tikka's where it all works very well right out of the box
Trystan
You and I have different experiences with the Tikka. You don't like plastic mags but you like the tikka? Or you just don't like the browning plastic mag? All the one's I've seen were display models so the mag was not in the gun. I didn't say I don't like plastic mags. I said I didn't like the way the Browning AB3 feeds but that is due to the feed ramp needing work not the plastic mag. Lol...breathe dude. I wasn't accusing you. I was asking you if you just didn't like the browning mags. Lol, I didn't mean to come off as defensive. I do like the tikka mag better because it's a single stack mag and they feed better than the AB3's double stack mag. Other Brownings such as the Hells Canyon have a single stack mag design and feed much better than the AB3 as well. I've never had a problem with a mag being plastic or metal though I actually prefer plastic. I've never had a plastic mag break and they form a lot less condensation when moving from freezing to warm truck temps. Also plastic is lighter and if it holds up light is good IMO
Good bullets properly placed always work, but not everyone knows what good bullets are, or can reliably place them in the field
|
|
|
|
Joined: Oct 2018
Posts: 229
Campfire Member
|
Campfire Member
Joined: Oct 2018
Posts: 229 |
My lovely wife gave me a Boyds “At-One” stock for Yaksmas. I had no idea that Boyds made a stock for Browning ab3.
So I just got done bedding it with homemade steel pillars and gray Marine Tex epoxy on front and back. I just now got done separating this bedded stock from the action for first time. It looks good.
Challenge with bedding a Browning ab3 is that you need to keep trigger in place when bedding rear tang because it’s mount sits between action and stock where bedding needs to go. I wrapped trigger mechanism thoroughly with masking tape and had no problem.
Wish me luck when I get around to shooting it.
|
|
|
|
Joined: Nov 2005
Posts: 7,506
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2005
Posts: 7,506 |
My cousin has 2 ab3 rifles, one in 06 and another in 7mmremmag. He doesn't know how to tinker with a rifle and is too tight to pay a gunsmith. Both of his ab3's went from box to bench for scope mounting, then to the field. To my knowledge he's never done a thing to them. He's killed at least 20 elk and many, many deer. They just work. I'd not hesitate.
|
|
|
|
76 members (007FJ, 6mmCreedmoor, 35, 444Matt, 7mm_Loco, 12 invisible),
1,472
guests, and
876
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,370
Posts18,488,311
Members73,970
|
Most Online11,491 Jul 7th, 2023
|
|
|
|