|
Joined: Jan 2001
Posts: 18,075
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jan 2001
Posts: 18,075 |
7mm Remington Magnum, Brian Pearce, HANDLOADER #323
Friend Allan Jones, the editor of the Speer Reloading Manuals No. 12, No. 13 and No. 14, reported that “there is a great deal of velocity variation among sporters in this caliber.” He continues that “Rifles in the Speer’s lab’s collection posted velocities varying from 400 ft/sec under to 300 ft/sec over those posted by the SAAMI pressure barrel with the same ammo.” While I have not experienced the incredible 700-fps swings in sporter rifles that the Speer lab has, I have seen 300- to 400-fps swings with identical loads between Remington, Weatherby, Winchester, Ruger, Interarms and Sako rifles, each featuring 24-inch barrels.
Questions: So factory loads must be pretty weak, just in case? Treat each rifle independently don't shoot same loads in multiple rifles unless really conservatively loaded? Barrel and or chamber specs all over the place causing this issue? I've always read this about the 7 mag and I thoroughly trust the author so would probably be very diligent to segregate ammo if owned multiples. Thoughts? Mike
God, Family, and Country. NRA Endowment Member
|
|
|
|
Joined: Apr 2011
Posts: 151,160
Campfire Savant
|
Campfire Savant
Joined: Apr 2011
Posts: 151,160 |
I have five 7mm Rem mags. I load 64 grains of IMR 4350 with a 140 Ballistic Tip for all of them. I need to get a chronograph to check velocities for the heck of it. This has made me curious. Two 700’s, two Sako’s, and a Kleinguenther K-15.
Last edited by hanco; 11/06/19.
|
|
|
|
Joined: Aug 2005
Posts: 3,712
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2005
Posts: 3,712 |
I have a Rem. 7mm magnum purchased around 1992. I have always found it necessary to go 3 to 4 grains over book maximums in order to come close to the velocities forecast in the loading manuals. Brass always lasted for many reloadings, no other problems experienced.
Jim
|
|
|
|
Joined: Jan 2001
Posts: 18,075
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jan 2001
Posts: 18,075 |
It wouldn't be so odd to me if it wasn't only ever mentioned about this particular round.
Mike
God, Family, and Country. NRA Endowment Member
|
|
|
|
Joined: Sep 2014
Posts: 21,771
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2014
Posts: 21,771 |
243 gets some mention.
Never had any issue with either, but I have only loaded for 2 or 3 rifles in each.
Parents who say they have good kids..Usually don't!
|
|
|
|
Joined: Jan 2010
Posts: 13,136
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2010
Posts: 13,136 |
69 grains of Reloader 26 under a 162 eldx gives less than 10 FPS difference between two Tikkas.
Obey lawful commands. Video interactions. Hold bad cops accountable. Problem solved.
~Molɔ̀ːn Labé Skýla~
Member #547 Join date 3/09/2001
|
|
|
|
Joined: Jan 2001
Posts: 18,075
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jan 2001
Posts: 18,075 |
I've never really wanted a 7 mag but know where there is a fairly nice, push feed model 70 with the plastic stock appears 24 or 26" barrel for a price of what the action alone is worth.
Kinda peaked my interest.
Mike
God, Family, and Country. NRA Endowment Member
|
|
|
|
Joined: Oct 2008
Posts: 7,263
Campfire Tracker
|
Campfire Tracker
Joined: Oct 2008
Posts: 7,263 |
I always suspected some of this was due to when factory loads were loaded with 7828 powder the same for the 243. I have never had any verification of this other than anecdotal experiences of others. Of course chamber differences and throat wear are additional causes. I have shot out one 7RM and probably didn't shoot more than a couple boxes of factory loads in it so almost no testing on my part with factory fodder. If it was case geometry then the 264 Win. should show the same variation, but the only inconsistency I have heard of with the 264 was due to two diameter bullets when compared to conventional single diameter bullets.
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
|
|
|
|
Joined: Jun 2004
Posts: 44,820
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,820 |
Load data for the 243 Win. and 7mm Rem. magnum being more conservative than in the past isn't because of differences between individual rifles.
|
|
|
|
Joined: Jul 2014
Posts: 2,556
Campfire Regular
|
Campfire Regular
Joined: Jul 2014
Posts: 2,556 |
I had a Savage 7 mag for a long time that was a hammer. I was using original Barnes X at the time. I had the 160 loaded to around 2900. I bought another Savage and that barrel/chamber? was so much tighter, that I had to back off the load by five grains to quit seeing pressure signs. I went back to Interlocks and Partitions, with the load tailored to the newer rifle and never had another issue.
You did not "seen" anything, you "saw" it. A "creek" has water in it, a "crick" is what you get in your neck. Liberals with guns are nothing but hypocrites.
|
|
|
|
Joined: Jul 2007
Posts: 1,581
Campfire Regular
|
Campfire Regular
Joined: Jul 2007
Posts: 1,581 |
The best eye opener for me regrding the 7 mm Rem Mag was Ken Water's Pet Loads from January 1981. He referenced a couple of things that he thought were common to the cartridge that affected it round a lot. This was the first round I loaded for back in 1973, and had me scratching my head for quite some time. I have had several rifles (five if memory serves) and they have all been unique from the others. According to Waters there were (as I saw it) a couple of things that affected it. One he pointed to a wide variation in case capacities of different headstamps of brass, secondly he indicated a wide variation in chamber dimensions, as the critical headspace dimension was the belt, there seemed to be less regard for tolerances at the shoulder. Whether or not any of this still holds true, I don't know, but every time I load for a different 7 mm RM, I use a box of factory ammo and my chronograph as a reference point, along with loading notes and good data sources. So I took from that that if you had a particular 7 RM with an oversize chamber and a case with greater internal dimension than another 7 RM, they might be considered a "wildcat" each to the other.
Steve
Theodore Roosevelt: "Do what you can where you are with what you have"
|
|
|
|
Joined: Apr 2008
Posts: 1,976
Campfire Regular
|
Campfire Regular
Joined: Apr 2008
Posts: 1,976 |
The best eye opener for me regarding the 7 mm Rem Mag was Ken Water's Pet Loads from January 1981. He referenced a couple of things that he thought were common to the cartridge that affected it round a lot. This was the first round I loaded for back in 1973, and had me scratching my head for quite some time. I have had several rifles (five if memory serves) and they have all been unique from the others. According to Waters there were (as I saw it) a couple of things that affected it. One he pointed to a wide variation in case capacities of different headstamps of brass, secondly he indicated a wide variation in chamber dimensions, as the critical headspace dimension was the belt, there seemed to be less regard for tolerances at the shoulder. Whether or not any of this still holds true, I don't know, but every time I load for a different 7 mm RM, I use a box of factory ammo and my chronograph as a reference point, along with loading notes and good data sources. So I took from that that if you had a particular 7 RM with an oversize chamber and a case with greater internal dimension than another 7 RM, they might be considered a "wildcat" each to the other. Along similar lines... I bought my first 7mm Remington Magnum, a new Sendero, a few years ago when there were shortages of many components. The only new brass I could find was PPU, a brand I was not familiar with. As things turned out, I eventually found some new Winchester brass. The PPU brass averaged 14% greater weight than did the Winchester brass; enough weight difference that I had to increase powder charges by about 1.5 grains with the Winchester brass to get the same velocity as I was getting with PPU brass using a 140 grain bullet. Nothing wrong with the PPU cases, but I don't recall running into a weight disparity that great with any other brass.
|
|
|
|
Joined: Mar 2005
Posts: 26,219
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2005
Posts: 26,219 |
Questions:
So factory loads must be pretty weak, just in case?
Treat each rifle independently don't shoot same loads in multiple rifles unless really conservatively loaded?
Barrel and or chamber specs all over the place causing this issue?
I've always read this about the 7 mag and I thoroughly trust the author so would probably be very diligent to segregate ammo if owned multiples.
Thoughts?
Mike
The 7mmRM exhibits a lot of pressure variation (AKA pressure spikes) from shot to shot even in SAAMI pressure bbls. That is why twice in the 1970's Remington lowered the powder charge--and consequently the advertised MV--in their ammunition. In 1970 MV with a 150gr factory load was advertised at 3260 fps,, by 1978 was advertised at 3110 fps.
Casey
Not being married to any particular political party sure makes it a lot easier to look at the world more objectively... Having said that, MAGA.
|
|
|
|
Joined: Jun 2004
Posts: 44,820
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,820 |
I wouldn't describe the broader pressure probability distribution as pressure spikes.
|
|
|
|
Joined: Jul 2001
Posts: 60,086
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,086 |
My understanding, from more than one major pressure lab, is that the 7mm RM shows a wider spread in pressures than most other cartridges of the same class, both high and low. Which is why the SAAMI Maximum Average Pressure (MAP) was set at around 60,000 PSI when piezo-electronic pressure-testing became standard.
Some other rounds have a SAAMI MAP of 65,000 PSI, which is as high as SAAMI will go, but they also have standard for what the highest-pressure round in a string measures, to allow a safety margin.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: Mar 2005
Posts: 26,219
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2005
Posts: 26,219 |
Which is why I used the word "variation". There will always be some degree of shot variation in the same firearm, and of course in different rifles or loads when compared to one another. But I'm talking about the same load in the same SAAMI spec pressure bbl.
Last I knew there has been no definitive reason discovered why the 7mmRM displays such a large shot to shot variation. And when Remington couldn't figure it out they lowered the powder charge in the 70's.
Casey
Not being married to any particular political party sure makes it a lot easier to look at the world more objectively... Having said that, MAGA.
|
|
|
|
Joined: Jun 2004
Posts: 44,820
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,820 |
Which is why I used the word "variation". ... With the added a/k/a pressure spikes, which was the bone I picked.
|
|
|
|
Joined: Mar 2005
Posts: 26,219
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2005
Posts: 26,219 |
Which is why I used the word "variation". ... With the added a/k/a pressure spikes, which was the bone I picked. Ok, I understand
Casey
Not being married to any particular political party sure makes it a lot easier to look at the world more objectively... Having said that, MAGA.
|
|
|
|
Joined: Dec 2004
Posts: 3,639
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2004
Posts: 3,639 |
I've owned a few 7 Rem Mags.....I don't care a lot for them as they turn out to be just another .270 wannabe. But of the few I've owned, I've never encountered anything like the things claimed in this thread. It's not that I don't believe it....it's just that I've not experienced it.
|
|
|
|
Joined: Oct 2008
Posts: 7,263
Campfire Tracker
|
Campfire Tracker
Joined: Oct 2008
Posts: 7,263 |
The 7RM and 300 Win. cases do seem to vary more than most. I use one lot of brass for each rifle and after the first firing no issues. I have not been able to detect any pressure excursions with my rifles. Maybe if I shot more long range targets I would but I am not much of a target shooter.
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
|
|
|
|
546 members (17CalFan, 10gaugeman, 160user, 1234, 16gage, 06hunter59, 58 invisible),
2,333
guests, and
1,295
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,402
Posts18,470,144
Members73,931
|
Most Online11,491 Jul 7th, 2023
|
|
|
|