'winds,
I rather like 84L ergo's and that greases skids. Hint.
If one were to 7-08 same,be thinkin' 180's and gave a thunk to keeping the start of the heel's taper a CH below neck/shoulder juncture,it'd prolly look like this. Hint.(grin)
I don't currently have any 7-08's wearing that much freebore,but it certainly wouldn't aspook me to build to a Dummy of that length,so as to place the Smooch. Barrels are cheap in my book and I go through more than a few of them,because they are both a consumable and that soooooooo very often,Manufacturer's are fhuqking CLUELESS with OEM wares. Hint.
I drive 180's ala binderless AICS DBM'd S/A 700's,in both 7-08 and 7-08AI. 2.950" is a breeze and often 2.975" is too. I can also Smooch 180's in 7 Whizzum 8400 Montucky's...both illustrated(162 to far left). I've ZERO qualm,in either/all approaches,but throat specs are obviously gonna be different. Hint.
The 84L 8" RPM Linda Lovelace 180 Launching Bitch,would not be difficult to add to the larder. I'd go 23" there,just because that's how I went on my Six Twat-Six 1-8" RPM Brux and it handles well. In OEM guise while straight Twat-Six,the 24" felt like schit.
Wayyyyy better at 22". Hint.
Shot Skinner magfed Smooches good 'nuff. Hint.
I like to dupe contour and lose some shank,on all of my Custom Montucky's and would certainly do so in 7-08. Hint.
She'd be a dirty GOOD Sleeper and wouldn't beatcha' up.
Hint......................