|
Joined: Jan 2010
Posts: 1,897 Likes: 2
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2010
Posts: 1,897 Likes: 2 |
Where is a good source for revolver chamber throat gauges? I need a set to measure .357 and .44 cylinder throats. Tried Brownell's, but no luck. I don't want reamers, just the gauges to check. If reaming needs doing, I'll take it to a real gunsmith. I also took a quick look at e-bay, but I don't need a set with a bazillian different sized gauges. Thanks for the help!
"...why, land is the only thing in the world worth working for, worth fighting for, worth dying for,... because it is the only thing that lasts."
|
|
|
|
Joined: Nov 2002
Posts: 33,741 Likes: 5
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,741 Likes: 5 |
I have a full set and would be happy to send whatever sizes you want. I am in Boerne Texas. Use them and send them back with a $10 bill to cover shipping. PM me if interested.
Conduct is the best proof of character.
|
|
|
|
Joined: Mar 2011
Posts: 4,874
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2011
Posts: 4,874 |
Great gesture by EdM! Pin gages are definitely the way to go. I have Starret small hole gages, but they are a little more finicky/slower to use.
An old coworker uses a different method. He drives soft lead though each chamber, then measures with a micrometer.
And you may already know this, but if the throats are undersized, you'll want them honed and not reamed.
|
|
|
|
Joined: Sep 2005
Posts: 4,285
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2005
Posts: 4,285 |
Search "Pin Gage" on Amazon and you'll likely find what you're looking for.
|
|
|
|
Joined: Sep 2019
Posts: 2,082
Campfire Regular
|
Campfire Regular
Joined: Sep 2019
Posts: 2,082 |
I think I would take EdM up on his generous offer. There's some good people on the campfire. If you were measuring 44 and 45 cylinder throats you can get a general idea using a .30-06 case. Insert it in the cylinder mouth, give it a gentle turn, then measure the shiny ring with calipers. not as accurate as pin gauges, but but will give you a general idea.
|
|
|
|
Joined: Apr 2005
Posts: 30,955 Likes: 3
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2005
Posts: 30,955 Likes: 3 |
Great gesture by EdM! Pin gages are definitely the way to go. I have Starret small hole gages, but they are a little more finicky/slower to use.
An old coworker uses a different method. He drives soft lead though each chamber, then measures with a micrometer.
And you may already know this, but if the throats are undersized, you'll want them honed and not reamed.
You can simply measure the throats with the calipers fir a good ball park number
I got banned on another web site for a debate that happened on this site. That's a first
|
|
|
|
Joined: Jan 2010
Posts: 1,897 Likes: 2
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2010
Posts: 1,897 Likes: 2 |
I tried the caliper test and also the bullet test with both jacketed and cast bullets. That led me to believe that further and more accurate testing is desired. My initial concern is I am having some leading issues with my .44 using coated cast bullets. I think most of my problem was due to not belling the cases quite enough and maybe scratching the coating when seating the bullets. I increased the bell and this helped, but still have some issue. Running .44 mag coated cast at 1130 FPS and .44 spl at 950 FPS. I also have three .38s and a .357 that I have been running coated cast .38s through. No apparent leading issues with them, but very curious about the chamber throats as well since this has come up with my .44. I have taken EdM up on his very generous offer.
"...why, land is the only thing in the world worth working for, worth fighting for, worth dying for,... because it is the only thing that lasts."
|
|
|
|
644 members (16gage, 1beaver_shooter, 160user, 1Longbow, 01Foreman400, 12344mag, 71 invisible),
2,923
guests, and
1,268
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,622
Posts18,492,717
Members73,972
|
Most Online11,491 Jul 7th, 2023
|
|
|
|