|
Joined: May 2011
Posts: 15,886
Campfire Ranger
|
OP
Campfire Ranger
Joined: May 2011
Posts: 15,886 |
So I've been using the Lee manual priming tool for years and years. I have one for small primers and one for large primers. It's been working okay and without a lot of drama. However, today while priming some 17 Hornet brass, I really struggled in keeping the primers in the correct orientation and overall ease of priming, which is something I'd not experienced before. It was enough that it made me a bit twitchy and concerned about a primer detonation. I don't like that.
So, those of you who manually prime your brass, what brand of primer tool do you use or what would you recommend?
There are 2 rules to success:
1. Never tell everything that you know.
|
|
|
|
Joined: Apr 2008
Posts: 1,976
Campfire Regular
|
Campfire Regular
Joined: Apr 2008
Posts: 1,976 |
I've used several hand priming tools and I've primed on presses in the last fifty-five years. All I've used for several years now is the 21st Century hand priming tool. Good quality and works better than anything I've used in the past.
|
|
|
|
Joined: Dec 2008
Posts: 78,300
Campfire Oracle
|
Campfire Oracle
Joined: Dec 2008
Posts: 78,300 |
Lyman. Works well and is reasonably priced. Plus it uses your usual shell holders.
"...the left considers you vermin, and they'll kill you given the chance..." Bristoe
|
|
|
|
Joined: Mar 2007
Posts: 4,319
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2007
Posts: 4,319 |
I have used the Sinclair for years. Not cheap but it is a quality piece of equipment.
NRA Life Member
~Molɔ̀ːn Labé Skýla~
|
|
|
|
Joined: Nov 2008
Posts: 8,641
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2008
Posts: 8,641 |
25 years and still works. Parts for repair available if needed. ![[Linked Image from i.postimg.cc]](https://i.postimg.cc/Hk36Mkdz/3-F37-D7-B8-959-D-451-A-96-F0-487473-F788-D1.jpg)
Swifty
|
|
|
|
Joined: Mar 2017
Posts: 232
Campfire Member
|
Campfire Member
Joined: Mar 2017
Posts: 232 |
Swifty, Santa brought me one of those this past Christmas. The best thing since sliced bread. Where in Hell have I been for all these years?
What man, on his death bed, ever lamented, "God, I wish I had spent more time at the office."
|
|
|
|
Joined: Aug 2011
Posts: 3,689
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2011
Posts: 3,689 |
Have used the lee and rcbs handheld.
I prefer using my rockchucker.
|
|
|
|
Joined: May 2011
Posts: 15,886
Campfire Ranger
|
OP
Campfire Ranger
Joined: May 2011
Posts: 15,886 |
25 years and still works. Parts for repair available if needed. ![[Linked Image from i.postimg.cc]](https://i.postimg.cc/Hk36Mkdz/3-F37-D7-B8-959-D-451-A-96-F0-487473-F788-D1.jpg) How do you feed it?
There are 2 rules to success:
1. Never tell everything that you know.
|
|
|
|
Joined: Aug 2010
Posts: 48,026
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,026 |
Have used the lee and rcbs handheld.
I prefer using my rockchucker. I also prefer using my rockchucker. It came with the press and supreme kit, why not use it huh? It always baffles me when I see guys waste their hard earned money on extra gizmo's they don't need... This reloading chit can be easy and kept to a minimum, or it can be made more complicated. KISS
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jul 2005
Posts: 23,499
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2005
Posts: 23,499 |
I been using the Rcbs hand priming tool that came with my rock chucker 12 yrs ago.. works great, never cared for the priming tool on the press..
Last edited by 79S; 05/23/20.
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego. Suckin' on my titties like you wanted me.
|
|
|
|
Joined: Nov 2008
Posts: 8,641
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2008
Posts: 8,641 |
The RCBS Automatic Bench Priming Tool is a great tool for the reloader looking for fast, accurate and highly sensitive feel when seating primers. One of the attributes that seasoned reloaders look for in a priming tool is the "feel" so they can tell how deep a primer has been seated, and if the primer they just seated felt like the primer they seated 10 rounds ago. By having a tool that provides sensitive feel reloaders can tell how consistent their priming operation is which helps to create more accurate ammunition. One other great attribute of this priming tool is that it helps to virtually eliminate primer contamination. Primers are fed through auto primer feed tubes one-by-one helping to maintain the integrity of primers by preventing potential contamination from oily fingers. All reloaders have to do to fill up the primer tubes is dump their primers into a primer flipping tray then use the primer pick-up tubes to pick up primers, so there should not be a chance for contamination. Notes: Comes with large and small primer tubes, primer cups and priming rod assemblies Made In United States of America
Swifty
|
|
|
|
Joined: May 2011
Posts: 15,886
Campfire Ranger
|
OP
Campfire Ranger
Joined: May 2011
Posts: 15,886 |
There are 2 rules to success:
1. Never tell everything that you know.
|
|
|
|
Joined: Nov 2006
Posts: 3,652
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2006
Posts: 3,652 |
Everybody has their own opinions but for me the K&M hand priming tool has the best feel of them all and is cheaper than the Sinclair and 21st Century. A bit slow being a single feed. The priming tool I use the most is the RCBS 90200 (they make a couple models but this is the one I like best) I have 2 of these one for large and one for small.
|
|
|
|
Joined: Nov 2006
Posts: 3,652
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2006
Posts: 3,652 |
Have used the lee and rcbs handheld.
I prefer using my rockchucker. I also prefer using my rockchucker. It came with the press and supreme kit, why not use it huh? It always baffles me when I see guys waste their hard earned money on extra gizmo's they don't need... This reloading chit can be easy and kept to a minimum, or it can be made more complicated. KISSThis is almost like going back to the era of the caveman..........OSU Sig, don't do this !!!!!!!!!!
|
|
|
|
Joined: Feb 2010
Posts: 15,654
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 15,654 |
NRA Life,Endowment,Patron or Benefactor since '72.
|
|
|
|
Joined: Apr 2004
Posts: 42,752
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,752 |
RCBS Rock Chucker kit...their hand priming tool... plus two others I bought separate...
one for 223, one for .473 bolt face and one that was for Magnums, which I don't seem to shoot.. so I just changed the shell holder on it for priming Grendel brass....
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
Joined: Aug 2010
Posts: 48,026
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,026 |
Have used the lee and rcbs handheld.
I prefer using my rockchucker. I also prefer using my rockchucker. It came with the press and supreme kit, why not use it huh? It always baffles me when I see guys waste their hard earned money on extra gizmo's they don't need... This reloading chit can be easy and kept to a minimum, or it can be made more complicated. KISSThis is almost like going back to the era of the caveman..........OSU Sig, don't do this !!!!!!!!!! boatanchor, you bring very little to the table in the way of advice. You should take up fishing or something.. Find something you are good at, because it sure as chidt isn't reloading and shooting or firearms related. Your post in the optics forum is funny as well. Pretty clueless...
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jan 2007
Posts: 11,518
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2007
Posts: 11,518 |
Aps system has some very good merits
|
|
|
|
Joined: Jun 2005
Posts: 2,205
Campfire Regular
|
Campfire Regular
Joined: Jun 2005
Posts: 2,205 |
I've heard good things about the K&M tool. I hear guys talking highly about the 21st century tool at our matches. They are mostly the F Open guys. It all depends on what you are after. I do not think my bench mounted rcbs primer is holding me back for my purposes, but it could for other venues. I only use my press mounted priming arm for pistol ammo these days.
Too close for irons, switching to scope...
|
|
|
|
Joined: Nov 2006
Posts: 307
Campfire Member
|
Campfire Member
Joined: Nov 2006
Posts: 307 |
Currently using the Frankford Arsenal hand priming tool. Very nice!
|
|
|
|
535 members (12344mag, 10gaugeman, 160user, 10gaugemag, 007FJ, 10ring1, 65 invisible),
2,881
guests, and
1,260
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,491
Posts18,471,957
Members73,936
|
Most Online11,491 Jul 7th, 2023
|
|
|
|