|
Joined: May 2003
Posts: 10,441 Likes: 1
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: May 2003
Posts: 10,441 Likes: 1 |
I bragged on here several months ago about grabbing a Superposed that had belonged to the father of a schoolmate, a good guy who is missed. He was long of everything, so it took me a while to get around to cutting the butt to fit an ordinary human.
Got that done, patterned it and it's perfect for what I wanted it for, trap. Don't need to bury the bird, the chokes are nice and tight.
Action looks great after a soak in the solvent tank, but the rear part of the lower barrel has some pitty gritty. Any objections to maybe having both tubes backbored the modern way? I like the chokes as they are.
Up hills slow, Down hills fast Tonnage first and Safety last.
|
|
|
|
Joined: Jun 2008
Posts: 13,359
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2008
Posts: 13,359 |
What are you expecting out of Backboring? Personally I think it is just throwing money away. But your gun and your expectations. I doubt whatever your expectations are you will see it in reality. The only thing you might get out of it in my opinion is a little lighter barrel.
Eat Fish, Wear Grundens, Drink Alaskan.
|
|
|
|
Joined: Nov 2008
Posts: 4,946
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2008
Posts: 4,946 |
I tend to agree with MCH here in terms of back boring the entire barrel. From your comments, it seems to me you are trying to repair and stop pitting in the barrel. The latter should be done, removing as little steel as possible as otherwise the pitting will get worse over time. Were it mine, I’d send it to Art’s Gunshop to have this done, and a thorough inspection for any other damage or corrosion. https://artsgunshop.com/
Last edited by GF1; 08/02/20.
|
|
|
|
Joined: Apr 2014
Posts: 1,421
Campfire Regular
|
Campfire Regular
Joined: Apr 2014
Posts: 1,421 |
backboring. the cost doesn't justify the gain.
Retired Military Aviation Former Member, Navy Shooting Team Distinguished Pistol Shot NRA Certified Instructor/RSO
|
|
|
|
Joined: Nov 2002
Posts: 33,839 Likes: 19
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,839 Likes: 19 |
I tend to agree with MCH here in terms of back boring the entire barrel. From your comments, it seems to me you are trying to repair and stop pitting in the barrel. The latter should be done, removing as little steel as possible as otherwise the pitting will get worse over time. Were it mine, I’d send it to Art’s Gunshop to have this done, and a thorough inspection for any other damage or corrosion. https://artsgunshop.com/What is "this"?
Conduct is the best proof of character.
|
|
|
|
Joined: Jan 2007
Posts: 20,831 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2007
Posts: 20,831 Likes: 2 |
Backbored barrels have recently became popular again. However, Stan Baker was doing the same in the 70’s. If you decide to do so, go big.
laissez les bons temps rouler
|
|
|
|
Joined: Nov 2008
Posts: 4,946
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2008
Posts: 4,946 |
“This” is what I was talking about in the first paragraph - a repair to remove the pitting inside the barrel.
|
|
|
|
Joined: Oct 2006
Posts: 10,092
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2006
Posts: 10,092 |
Don’t mess with the barrels on that gun! How much did you cut it? These guns were really well done and best to leave them as issues unless they are unsafe.
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Oct 2017
Posts: 1,672
Campfire Regular
|
Campfire Regular
Joined: Oct 2017
Posts: 1,672 |
Don’t mess with the barrels on that gun! How much did you cut it? These guns were really well done and best to leave them as issues unless they are unsafe. Exactly correct. Superposeds had a unique barrel in that the taper to the choke started at the end of the chamber and was gradual to the muzzle. Don't screw with it.
TV has become nothing more than the Petri dish where this country grows its idiots.
|
|
|
|
Joined: May 2003
Posts: 10,441 Likes: 1
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: May 2003
Posts: 10,441 Likes: 1 |
Okay, I guess I'll just keep it clean like I ordinarily try to do and leave it wet (not too wet, mind you).
I was under the impression that backboring as currently done slightly reduces felt recoil and improves patterning, by introducing a more-gradual taper to the bore in the back of the barrel than in "ordinary" shotgun barrels. But if it's already a long cone to the start of the choking, that's about as gradual as can be. The frosting and pitting isn't bad, I can see it but not feel it while brushing or patching. About what your punishment would be if you got your shottie rained on and went drinking before cleaning.
Up hills slow, Down hills fast Tonnage first and Safety last.
|
|
|
|
Joined: Apr 2014
Posts: 1,421
Campfire Regular
|
Campfire Regular
Joined: Apr 2014
Posts: 1,421 |
if youre worrying about recoil, you got the wrong gun. just shoot low recoil loads. youll be aok.
Retired Military Aviation Former Member, Navy Shooting Team Distinguished Pistol Shot NRA Certified Instructor/RSO
|
|
|
|
Joined: Jan 2007
Posts: 20,831 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2007
Posts: 20,831 Likes: 2 |
This is the only place I have heard a shotgun being called a Shotie...Of course it is also the only place I've heard a Winchester called a Wiinnie....Then there is Leupie.....Very odd....
laissez les bons temps rouler
|
|
|
|
Joined: Jan 2010
Posts: 32,130 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2010
Posts: 32,130 Likes: 1 |
If you put Taco Bell sauce in your ramen noodles it tastes just like poverty
|
|
|
|
Joined: Jan 2007
Posts: 20,831 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2007
Posts: 20,831 Likes: 2 |
As long as you don’t call your Parker a Parkie..👍
laissez les bons temps rouler
|
|
|
|
Joined: Jan 2017
Posts: 8,960 Likes: 6
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2017
Posts: 8,960 Likes: 6 |
That mean we can't call our L C Smith's (elsie) ?
" Cheapest velocity in the world comes from a long barrel and I sure do like them. MB "
|
|
|
|
Joined: Jan 2010
Posts: 32,130 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2010
Posts: 32,130 Likes: 1 |
That mean we can't call our L C Smith's (elsie) ? Elsie's a hottie.
If you put Taco Bell sauce in your ramen noodles it tastes just like poverty
|
|
|
|
Joined: Apr 2017
Posts: 3,196 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2017
Posts: 3,196 Likes: 1 |
Elsie is one of only three guns that I can recall off hand that I use a knickname for. The others are actually variations of the same basic gun - Emily and Smelly. Everything else uses the full (e.g. Remington) or partial (1100). The others send shivers down my spine.
|
|
|
|
Joined: Jan 2007
Posts: 20,831 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2007
Posts: 20,831 Likes: 2 |
Try this: “He went to Deerie camp, but first shot some small game for the pot. Not sure which shotie he used, but the Grousie and Sauirrelie were appreciated.”
In places that would be good for some serious abuse. One would be better off to pass gas in church. Which is perfectly fine if doing heavy squats in a crowded gym.
Last edited by battue; 08/04/20.
laissez les bons temps rouler
|
|
|
|
Joined: Nov 2008
Posts: 4,946
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2008
Posts: 4,946 |
Elsie may be a hottie, but wait ‘till you get a dose of Foxy.
|
|
|
|
Joined: Jan 2017
Posts: 8,960 Likes: 6
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2017
Posts: 8,960 Likes: 6 |
All ready had a dose of Foxy and if she hadn't been shot hard ,used poorly, and put away wet too often she'd still be around. As was I made the best use of her selling her. MB
" Cheapest velocity in the world comes from a long barrel and I sure do like them. MB "
|
|
|
|
547 members (12344mag, 160user, 10gaugeman, 117LBS, 1234, 06hunter59, 60 invisible),
2,742
guests, and
1,218
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,795
Posts18,536,418
Members74,041
|
Most Online11,491 Jul 7th, 2023
|
|
|
|