|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
For a 7000# gvwr flatbed trailer. Have yet to park it while not attached to the truck. Even at max load, a 1000# jack seems plenty.
Recos?
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
Joined: Jan 2001
Posts: 30,784 Likes: 9
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2001
Posts: 30,784 Likes: 9 |
T R U M P W O N !
U L T R A M A G A !
|
|
|
|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
What im trying to figure is jack capacity rating. I can get one locally.
Currently have a jack on the trailer, but due to mods I want, I need a different style.
Is there a rule of thumb to determine jack capacity?
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
OK. Google-fu tells me I simply need to be able to meet tongue weight.
I'm GTG.
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
Joined: Nov 2008
Posts: 19,537 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2008
Posts: 19,537 Likes: 1 |
If you want I'll go check the make on the 10K trailer I just bought last month. That thing is smooooooth and nice. Better than I've had before. The Bulldog I had on the previous 7k always seemed chincy. and tough.
MAGA
|
|
|
|
Joined: Jan 2006
Posts: 69,390 Likes: 4
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2006
Posts: 69,390 Likes: 4 |
I put this on my camp trailer last year. It can be run up or down with a battery drill with a 3/4" socket or with the handle. I use an 18v Milwaukee. It's rated for 2k but I think that's a stretch. My trailer only has a 500 tongue wt and it works like a champ. 1000 would be working it quite a bit harder of course. JACK
“In a time of deceit telling the truth is a revolutionary act.” ― George Orwell
It's not over when you lose. It's over when you quit.
|
|
|
|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
If you want I'll go check the make on the 10K trailer I just bought last month. That thing is smooooooth and nice. Better than I've had before. The Bulldog I had on the previous 7k always seemed chincy. and tough. Thanks. I got it sorted now.
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
Joined: Jun 2010
Posts: 263
Campfire Member
|
Campfire Member
Joined: Jun 2010
Posts: 263 |
One thing nice about using a jack with weld on stubs. You can buy extra stubs and weld on the frame back at the wheels.As long as the trailer is hooked up don't have to hunt for a jack to change a flat.I've only done it on smaller trailers going to need a bigger jack than tongue weight when loaded.
|
|
|
|
Joined: Jun 2001
Posts: 19,085
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2001
Posts: 19,085 |
Anytime I have a question about trailers, I call Etrailers.com. Great guys that can answer about any question.They guided me thru selecting a load equalizer hitch, installation and adjusting
If God wanted you to walk and carry things on your back, He would not have invented stirrups and pack saddles
|
|
|
|
Joined: Apr 2010
Posts: 8,184 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2010
Posts: 8,184 Likes: 1 |
One thing nice about using a jack with weld on stubs. You can buy extra stubs and weld on the frame back at the wheels.As long as the trailer is hooked up don't have to hunt for a jack to change a flat.I've only done it on smaller trailers going to need a bigger jack than tongue weight when loaded. That’s a good idea, why didn’t I think of that.
|
|
|
|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
The jack that came on the trailer was fine, but did not allow for mounting a spare tire plus a tool box. Original jack was welded to cross brace angle where the front of the box is now. I like how it turned out. Original jack.
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
Joined: Dec 2013
Posts: 23,686 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2013
Posts: 23,686 Likes: 1 |
What's the difference in weight ratings between the original and the replacement if any? IMHO, the replacement bolted down isn't as good as the welded original, but dependent on what your load I'd on the trailer when not attached to your vehicle, it might not matter. I leave equipment on my trailers regularly so the jack takes a lot of abuse.
|
|
|
|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
What's the difference in weight ratings between the original and the replacement if any? IMHO, the replacement bolted down isn't as good as the welded original, but dependent on what your load I'd on the trailer when not attached to your vehicle, it might not matter. I leave equipment on my trailers regularly so the jack takes a lot of abuse. The A frame jack is 5K. Don’t know rating on original, but suspect it’s higher. As I said in the OP, GVWR is 7K, so 15% is 1050#. Even @ a full load (seldom to never) I’m covered with plenty of margin. The big factor for my use, is being able to have the box and spare, both mounted.
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
Joined: Jan 2020
Posts: 5,172
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2020
Posts: 5,172 |
Life is good live it while you can.
|
|
|
|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
Joined: Jan 2008
Posts: 17,312 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2008
Posts: 17,312 Likes: 1 |
One thing nice about using a jack with weld on stubs. You can buy extra stubs and weld on the frame back at the wheels.As long as the trailer is hooked up don't have to hunt for a jack to change a flat.I've only done it on smaller trailers going to need a bigger jack than tongue weight when loaded. One of the best things I've learned here at the 24hcf. Great idea.
Screw you! I'm voting for Trump again!
Ecc 10:2 The heart of the wise inclines to the right, but that of a fool to the 24HCF.
|
|
|
|
Joined: Dec 2003
Posts: 86,230 Likes: 24
Campfire Oracle
|
OP
Campfire Oracle
Joined: Dec 2003
Posts: 86,230 Likes: 24 |
I use a jiffy jack on tandem trailers.
If you take the time it takes, it takes less time. --Pat Parelli
American by birth; Alaskan by choice. --ironbender
|
|
|
|
573 members (1234, 10gaugemag, 10Glocks, 1badf350, 1936M71, 60 invisible),
2,457
guests, and
1,368
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,195
Posts18,485,080
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|