24hourcampfire.com
Previous Thread
Next Thread
Print Thread
Hop To
SxS project coming along #15257079 09/25/20
Joined: Dec 2004
Posts: 13,415
JPro Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
Joined: Dec 2004
Posts: 13,415
So I waited about 10 years before I finally bit off on a SxS/UTV for myself, with my ATV being a 2005 Honda Rancher 4x4. My Tacoma has effectively done dual-duty for years and it shows the wear and tear for it. I figured it was time to buy something.

Picked up a new Kawasaki Mule FXT Pro this summer and am trying to make it into what I need for a work/hunt machine. Very impressed with the 6 person seating that can convert to a long-bed, as well as the 3cyl engine and the ride quality. I put on a 4" Highlifter lift kit this week, along with some new 14" wheels and 28x10 ITP Blackwaters. ITP has treated me well so far and they are USA tires (8ply radial). Ride quality remains good, even after the lift. I'm at 200 miles thus far. Digging the ground clearance now, as it was a bit too low in factory form.

[Linked Image from i.imgur.com]


[Linked Image from i.imgur.com]


For those of you with experience, do you prefer the flip-up windshields with struts, or the flip down with a hinge? There are some far better options out there these days than what is on my father's 2011 Polaris Ranger. Several hunting buds have gone the flip-up route. Coatings are good, but I'm trying to sort out which windshield offers better durability in the long run. Super ATV makes some good units, as does Seizmik. I hear that the solid windshields with vents can be not quite airy enough for our dusty and dry summers. Any insight is appreciated!




Now with even more aplomb
BP-B2

Re: SxS project coming along [Re: JPro] #15258244 09/26/20
Joined: Aug 2006
Posts: 147
G
gaswamp Offline
Member
Offline
Member
G
Joined: Aug 2006
Posts: 147
flip down windshield. is that mule liquid cooled?

Re: SxS project coming along [Re: JPro] #15258291 09/26/20
Joined: Dec 2004
Posts: 13,415
JPro Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
Joined: Dec 2004
Posts: 13,415
Yes, liquid cooled and EFI.


Now with even more aplomb
Re: SxS project coming along [Re: JPro] #15259400 09/26/20
Joined: Jan 2020
Posts: 587
T
Torqued Offline
Campfire Regular
Offline
Campfire Regular
T
Joined: Jan 2020
Posts: 587
Nice looking sxs there. I have a 1 piece lexan windshield on my sxs. It's about to become a fold down. The next windshiled will be d.o.t


Just because you're offended doesn't mean your right.
Re: SxS project coming along [Re: JPro] #15261514 09/27/20
Joined: Aug 2006
Posts: 147
G
gaswamp Offline
Member
Offline
Member
G
Joined: Aug 2006
Posts: 147
hows the noise level and heat level in the cab

IC-A

Re: SxS project coming along [Re: JPro] #15261790 09/27/20
Joined: Dec 2004
Posts: 13,415
JPro Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
Joined: Dec 2004
Posts: 13,415
It's relatively quiet, much like my buddy's P1000 Honda Pioneer. A lot better than SxS units of old. Sound levels have come a long way.

As far as heat goes, it's good, as the motor is under the backseat area, so the driver catches very little. Kids don't complain either. I think it's a pretty well-sorted machine.


Now with even more aplomb
Re: SxS project coming along [Re: JPro] #15264740 09/28/20
Joined: Jan 2001
Posts: 6,718
badger Offline
Campfire Tracker
Offline
Campfire Tracker
Joined: Jan 2001
Posts: 6,718
Looks like you're on the edge there WRT CV joint angles. Not unreasonable to expect to replace CV boots on a more frequent interval, simply because you're working them harder. Not sure about CV joint life, as some are more robust than others. Good looking machine though.


To anger a conservative, lie to him. To annoy a liberal, tell him the truth.

Promoted to Turdlike status 03/17/12



Re: SxS project coming along [Re: JPro] #15264919 09/28/20
Joined: Dec 2004
Posts: 13,415
JPro Offline OP
Campfire 'Bwana
OP Offline
Campfire 'Bwana
Joined: Dec 2004
Posts: 13,415
I'd have preferred a 2-3" lift kit, but nobody makes one. This one is about 3.5-3.75". Some companies call them 2" kits, as they move the mounting location by 2" or so, but they all result in 3.5-4.5" of actual lift.

After doing a lot of reading online I couldn't find CV angles being an issue, even though a lot of people were asking before buying lifts. The common consensus is that the geometry looks less-than-ideal, but failures are uncommon due to the size of the joint. The kits have been around since 2016 or so. Will keep an eye on it though, as they will indeed be getting worked harder than before.


Now with even more aplomb
Re: SxS project coming along [Re: JPro] #15306755 10/12/20
Joined: Apr 2019
Posts: 51
2
24HourCampFireGuy50 Offline
Member
Offline
Member
2
Joined: Apr 2019
Posts: 51
Flip up vs flip down comes to if you want to open it on the go. I like the flip down for trailering but you have to stop and get out to move it on the trail. So for a short water section where flip ups temporarily close it, we get a little wet.


Moderated by  RickBin, SYSOP 

RR1
Who's Online Now
725 registered members (1234, 12344mag, 12savage, 100grNP, 10ring1, 117LBS, 81 invisible), 2,672 guests, and 816 spiders.
Key: Admin, Global Mod, Mod
RR2/3










Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2020 24hourcampfire.com, Inc. All Rights Reserved.
 
Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.3.24 Page Time: 0.056s Queries: 14 (0.003s) Memory: 0.8070 MB (Peak: 0.8962 MB) Data Comp: Zlib Server Time: 2020-11-26 20:20:08 UTC
Valid HTML 5 and Valid CSS