|
Joined: Jun 2001
Posts: 32,246 Likes: 8
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Jun 2001
Posts: 32,246 Likes: 8 |
Google research has me not much farther ahead than before I started, as to either psi needed or reliable brands. I have eliminated a couple brands from reviews. (and there may be a reason they are on Craigslist....)
I'll be washing cars frequently , doing sidewalks, blasting out mud from the ATVs, and prepping wood siding for re-staining. Wife wants to retain basic same color on the siding, only lighter (It's pretty dark brown now.)
I know Dewalt 3000 or higher will do it, but kinda spendy, and I don't need contractor grade stuff. Probably...
I'm hesitent to buy anything used, except maybe Dewalt, and I don't see many of those.
What PSI/gpm should I be considering, particularly the psi - how low can I go on this and get the job done? I'm thinking probably not under 2500?
Brands? Not paying shipping from Amazon or E-bay (if even avail to AK) so forget that.
I'm looking maybe Ryobi from local HD - especially if a Black Friday deal. There's a couple 3K in stock , more in Anchorage - 150 miles away.
Your input positive and negative is welcomed.
This would be cold water, only.
Last edited by las; 11/22/20.
The only true cost of having a dog is its death.
|
|
|
|
Joined: May 2016
Posts: 61,009 Likes: 71
Campfire Kahuna
|
Campfire Kahuna
Joined: May 2016
Posts: 61,009 Likes: 71 |
They are all basically the same...in my experience.
Gpm also matters a great deal.
Big pressure with low gpm is gayer'n aids.
I like honda motors.
I am MAGA.
|
|
|
|
Joined: Apr 2019
Posts: 6,083 Likes: 3
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2019
Posts: 6,083 Likes: 3 |
If you're not using it frequently then anything powered by a Honda GC 190 will do just fine. It will last for years. Here is a link to pressure washer direct. I had a pressure washer powered by a 7 hp Subaru industrial engine and Cat 5 pump and I sold it and recently tried an el cheapo powered by the Honda GC 190. Honestly, I couldn't tell an appreciable difference between the two. https://www.pressurewashersdirect.com/power/honda-gc190-engine-pressure-washers.html
Last edited by Tarquin; 11/22/20.
Tarquin
|
|
|
|
Joined: Aug 2015
Posts: 13,290 Likes: 5
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2015
Posts: 13,290 Likes: 5 |
Agree with the above. Whatever brand you get with a Honda motor should be good. If it's going to sit long between uses be sure to run the gas out of it for storage.
Let's Go Brandon! FJB
|
|
|
|
Joined: Jan 2010
Posts: 23,590 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2010
Posts: 23,590 Likes: 3 |
I have a GC190
I bought it at an auction site, site unseen. Got it home and the engine was locked up. Took it apart, got a rachet on it and unseized the motor. Poured some oil in it, it started on the 5th or 6th crank. Been using it regularly, always started on the second pull now. Doesn't smoke or burn oil.
have you paid your dues, can you moan the blues, can you bend them guitar strings
|
|
|
|
Joined: Jan 2001
Posts: 7,493
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2001
Posts: 7,493 |
Only advice I have is, be careful with anything over 2000psi. Very easy to blow paint off siding and vehicles.
To anger a conservative, lie to him. To annoy a liberal, tell him the truth.
Promoted to Turdlike status 03/17/12
|
|
|
|
Joined: Dec 2010
Posts: 3,734
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2010
Posts: 3,734 |
Google research has me not much farther ahead than before I started, as to either psi needed or reliable brands. I have eliminated a couple brands from reviews. (and there may be a reason they are on Craigslist....)
I'll be washing cars frequently , doing sidewalks, blasting out mud from the ATVs, and prepping wood siding for re-staining. Wife wants to retain basic same color on the siding, only lighter (It's pretty dark brown now.)
I know Dewalt 3000 or higher will do it, but kinda spendy, and I don't need contractor grade stuff. Probably...
I'm hesitent to buy anything used, except maybe Dewalt, and I don't see many of those.
What PSI/gpm should I be considering, particularly the psi - how low can I go on this and get the job done? I'm thinking probably not under 2500?
Brands? Not paying shipping from Amazon or E-bay (if even avail to AK) so forget that.
I'm looking maybe Ryobi from local HD - especially if a Black Friday deal. There's a couple 3K in stock , more in Anchorage - 150 miles away.
Your input positive and negative is welcomed.
This would be cold water, only.
Bought a dewalt years ago with a honda motor. No problems, just gave it to my son. (can get it back if I need it)
|
|
|
|
Joined: Nov 2010
Posts: 19,101 Likes: 4
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2010
Posts: 19,101 Likes: 4 |
Honda engine and CAT pump.
You can rebuild it.
Years back i bought a pressure washer from HD. Honda engine but a non serviceable pump.
Still got a good motor....
Of doing something hard to damage, concrete, bricks....
Get on of the Turbo rotating nozzles......
Dave
�The man who complains about the way the ball bounces is likely to be the one who dropped it.� Lou Holtz
|
|
|
|
Joined: Dec 2013
Posts: 23,698 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2013
Posts: 23,698 Likes: 5 |
Same as above. Make sure it has a Cat brand pump. If it has a Honda gx180 even better. Have an old dewalt plus another I can’t recall the name of but I bought it at Virginia pressure washer.
|
|
|
|
Joined: Apr 2013
Posts: 384
Campfire Member
|
Campfire Member
Joined: Apr 2013
Posts: 384 |
Used a Honda on decks, furniture, etc. this summer worked great. Think our contractor got it at Sam's Club for under $200.
|
|
|
|
Joined: Dec 2013
Posts: 23,698 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2013
Posts: 23,698 Likes: 5 |
If you’re in an area with freezing temps they make some winterizer you hook up to the hose inlet and spray in it. I run non ethanol in all our small engines if possible.
|
|
|
|
Joined: Feb 2006
Posts: 44,031 Likes: 28
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Feb 2006
Posts: 44,031 Likes: 28 |
We have a Work Pro MiTM brand(?), it's out in the garage. 200 Honda GX engine, runs great, 5-6 years old.
When winterizing we cycle RV antifreeze through the pump. Let it pressure up, spray a couple seconds, repeat a few times.
|
|
|
|
Joined: Jan 2012
Posts: 67,660 Likes: 78
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2012
Posts: 67,660 Likes: 78 |
Had an old codger call my office one day wanted to know why all of his neighbors needed “water pressure intensification devices” to wash their pickups and driveways. Because in Arizona where he previously lived, his shower would peel the skin off his back.
Guess he never lived next to a bunch of folks that like to keel their homes and vehicles clean.
|
|
|
|
Joined: Jan 2012
Posts: 67,660 Likes: 78
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2012
Posts: 67,660 Likes: 78 |
If you’re in an area with freezing temps they make some winterizer you hook up to the hose inlet and spray in it. I run non ethanol in all our small engines if possible. I bring mine in and park it under the mini pool table
|
|
|
|
Joined: Jun 2001
Posts: 32,246 Likes: 8
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Jun 2001
Posts: 32,246 Likes: 8 |
And the rifle is for if it pisses you off?
The only true cost of having a dog is its death.
|
|
|
|
Joined: Jul 2006
Posts: 4,912 Likes: 7
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2006
Posts: 4,912 Likes: 7 |
What PSI/gpm should I be considering, particularly the psi - how low can I go on this and get the job done? I'm thinking probably not under 2500?
I use a pressure washer occasionally for paint prep, cleaning the boat, driveway, wash down house, etc. Mine is 2600 at 2.3 gpm, low end Honda motor that I picked up used from a neighbor. It probably came from one of the big box stores. I'm happy with it.....seems plenty. It will certainly peel failed paint and grime for paint prep with a 25 degree nozzle, and with a zero degree nozzle maybe bore a hole in a sidewalk. I had a guy who uses pressure washers in his business tell me that the big box units with the throw away pumps last about 1000 hours and that I needed to spend a pile on a commercial grade machine or just rent one. He would fit right in around here! 1000 hours is a loooong time when you only use it once in a while.
Last edited by RJY66; 11/22/20.
"Men must be governed by God or they will be ruled by tyrants". --- William Penn
|
|
|
|
Joined: Jan 2001
Posts: 31,036 Likes: 30
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2001
Posts: 31,036 Likes: 30 |
If you’re in an area with freezing temps they make some winterizer you hook up to the hose inlet and spray in it. I run non ethanol in all our small engines if possible. I bring mine in and park it under the mini pool table John Deere pressure washer ?????????? Damm......... Gotta call the neighbor girl....she's 18 now........ [img] https://i.pinimg.com/736x/26/49/5c/26495ca7c7637338a02c2b6c6e8dabb0.jpg?b=t[/img]
T R U M P W O N !
U L T R A M A G A !
|
|
|
|
Joined: Jun 2001
Posts: 32,246 Likes: 8
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Jun 2001
Posts: 32,246 Likes: 8 |
If she needs a pressure washer you better pass that one by. Stick withe tractor models.
Last edited by las; 11/22/20.
The only true cost of having a dog is its death.
|
|
|
|
Joined: Jul 2009
Posts: 2,875
Campfire Regular
|
Campfire Regular
Joined: Jul 2009
Posts: 2,875 |
What ever brand you get make sure it has a Triplex pump on it, stay away from the Axial Cam pumps.
Retired and Loving It!! ΜΟΛΩΝ ΛΑΒΕ
|
|
|
|
600 members (1100mag, 10gaugemag, 10Glocks, 01Foreman400, 06hunter59, 52 invisible),
18,839
guests, and
1,308
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,972
Posts18,539,905
Members74,052
|
Most Online20,796 Yesterday at 04:44 PM
|
|
|
|