|
|
Joined: Nov 2004
Posts: 10,018 Likes: 3
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Nov 2004
Posts: 10,018 Likes: 3 |
I'm working up loads for my 350 legend AR today. I've been using pp300mp in my blackout and magnum pistols so if like a load with that powder in my 350 legend.
I've got some 147g xtps for varmint loads and some 170g Hornady interlocks that are designed for the legend for hunting bullets. Could someone run a quickload for each please? I'm using cci41 primers in starline brass. Seating depths will be mag length at max and likely less. Max mag lenght is 2.26"
Thanks, Bb
|
|
|
|
Joined: Nov 2011
Posts: 30,989
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2011
Posts: 30,989 |
What do you mean by "pp300mp"?
Last edited by antelope_sniper; 12/05/20.
You didn't use logic or reason to get into this opinion, I cannot use logic or reason to get you out of it.
You cannot over estimate the unimportance of nearly everything. John Maxwell
|
|
|
|
Joined: Nov 2004
Posts: 10,018 Likes: 3
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Nov 2004
Posts: 10,018 Likes: 3 |
Its an alliant powder. Power pro 300 mp.
Thanks, Bb
|
|
|
|
Joined: Nov 2011
Posts: 30,989
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2011
Posts: 30,989 |
Its an alliant powder. Power pro 300 mp.
Thanks, Bb Sorry, it's not in the Quick Load data base.
You didn't use logic or reason to get into this opinion, I cannot use logic or reason to get you out of it.
You cannot over estimate the unimportance of nearly everything. John Maxwell
|
|
|
|
Joined: Nov 2004
Posts: 10,018 Likes: 3
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Nov 2004
Posts: 10,018 Likes: 3 |
Thanks for checking. Pp300mp has been around about 10 years. I'll work it up the old fashioned way. I can probably start with h110 starting load. Pp300mp is usually a bit slower burning.
Bb
|
|
|
|
Joined: Oct 2005
Posts: 1,127 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Oct 2005
Posts: 1,127 Likes: 2 |
Yeah, my version of quickload didn't have it either, even though it had been out awhile when I got my update.
I've used PP300MP in the 350L and 357 Max, but not with the bullets you're using. According to my loads, going with H110 starting data should be a safe bet. My loads with MP topped out about 1 grain higher than my 296 loads with the same bullet.
FWIW, Quickload doesn't seem to be terribly accurate with these cartridges anyway.
|
|
|
|
536 members (1beaver_shooter, 06hunter59, 1badf350, 204guy, 1Longbow, 1OntarioJim, 53 invisible),
2,443
guests, and
1,259
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,308
Posts18,487,182
Members73,968
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|