|
Joined: Aug 2010
Posts: 48,202 Likes: 23
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,202 Likes: 23 |
So use the BCG you can get your hands on right now and when a good bolt comes along, throw your 9310 bolt away and replace it with a BCM or Tool craft, because blue says it's chidt. There sure is a lot of whining going on over this chidt. I seriously doubt anyone is going to see a bolt failure with one of these RTBA BCG's. I've put 1,000's of rounds on mine, just a FYI. I'd rather get something running and useable than sit around with my thumb in my azz, IF I were one of these guys wanting to get an AR going. How many 9310 bolts have you seen fail blue? Probably not too many... Just sayin. Generally when I buy a good barrel, it comes with a good bolt anyway, so there's also that. As we've all seen any BCG is hard to come by these days, and the best BCG's are unobtanium for the most part. Guys are having a hard time finding parts of all kinds. I was nice enough to let a barrel with low pro gas block and tube and handguard go to a good guy here for a steal this week because said parts are getting harder to find. Luckily I'm still able to find parts locally and plan on replacing the barrel with a matchgrade barrel later on. What gets me is there are guys here that are needing parts and I know a lot of you have tons of parts, but I have not seen you offer to help your fellow AR shooter out or a new AR shooter out with a good BCG, but you'd rather criticize what kind of parts the damn guy buys when times are tough. I say get off your fu cking high horse.
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Nov 2006
Posts: 10,189
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2006
Posts: 10,189 |
High horse? Well the ride is a lot better than walking through all the BS down there. But carry on...
|
|
|
|
Joined: Nov 2006
Posts: 10,189
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2006
Posts: 10,189 |
I’m always reminded of a conversation I had with a guy who worked at Colt in QC inspection. He said he rejected lots of parts that would not meet the criteria and would send them back to the vendor. He said the vendor wouldn’t scrap those parts, they’d sell em to another company that didn’t care and usually they were sold as “from a Colt mil spec supplier” even though they didn’t meet mil spec.
I bought a “Colt” RE a couple of months ago from a company mentioned here and I’ll never buy from them again. It was plain to see it was a reject.
But every time I’ve posted a good deal on a quality part, there’s always several here that claim it’s too high and X brand or company is “just as good as”. Frankly I don’t care anymore.
|
|
|
|
Joined: May 2007
Posts: 14,654
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2007
Posts: 14,654 |
Good parts aren’t hard to find. Good parts at prices from 12 months ago are hard to find. I’ve seen good BCGs, barrels, and complete uppers and rifles in the last couple of weeks. It’s called the internet. There’s stuff there.
your flippant remarks which you so adeptly sling
|
|
|
|
Joined: May 2007
Posts: 14,654
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2007
Posts: 14,654 |
So use the BCG you can get your hands on right now and when a good bolt comes along, throw your 9310 bolt away and replace it with a BCM or Tool craft, because blue says it's chidt. There sure is a lot of whining going on over this chidt. I seriously doubt anyone is going to see a bolt failure with one of these RTBA BCG's. I've put 1,000's of rounds on mine, just a FYI. I'd rather get something running and useable than sit around with my thumb in my azz, IF I were one of these guys wanting to get an AR going. How many 9310 bolts have you seen fail blue? Probably not too many... Just sayin. Generally when I buy a good barrel, it comes with a good bolt anyway, so there's also that. As we've all seen any BCG is hard to come by these days, and the best BCG's are unobtanium for the most part. Guys are having a hard time finding parts of all kinds. I was nice enough to let a barrel with low pro gas block and tube and handguard go to a good guy here for a steal this week because said parts are getting harder to find. Luckily I'm still able to find parts locally and plan on replacing the barrel with a matchgrade barrel later on. What gets me is there are guys here that are needing parts and I know a lot of you have tons of parts, but I have not seen you offer to help your fellow AR shooter out or a new AR shooter out with a good BCG, but you'd rather criticize what kind of parts the damn guy buys when times are tough. I say get off your fu cking high horse. You got all that from a picture with two red arrows?
your flippant remarks which you so adeptly sling
|
|
|
|
Joined: Sep 2006
Posts: 23,659 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,659 Likes: 1 |
I’m always reminded of a conversation I had with a guy who worked at Colt in QC inspection. He said he rejected lots of parts that would not meet the criteria and would send them back to the vendor. He said the vendor wouldn’t scrap those parts, they’d sell em to another company that didn’t care and usually they were sold as “from a Colt mil spec supplier” even though they didn’t meet mil spec.
That's a very common practice, way more than most people think, & it's not just limited to gun related parts either....................ask me how I know, 1st hand. That's why, IMO, it always better to buy directly from the actual manufacturer / vendor whenever possible. Doesn't always work, but I prefer doing that way when I can. MM
|
|
|
|
Joined: Sep 2010
Posts: 31,438
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 31,438 |
So use the BCG you can get your hands on right now and when a good bolt comes along, throw your 9310 bolt away and replace it with a BCM or Tool craft, because blue says it's chidt. There sure is a lot of whining going on over this chidt. I seriously doubt anyone is going to see a bolt failure with one of these RTBA BCG's. I've put 1,000's of rounds on mine, just a FYI. I'd rather get something running and useable than sit around with my thumb in my azz, IF I were one of these guys wanting to get an AR going. How many 9310 bolts have you seen fail blue? Probably not too many... Just sayin. Generally when I buy a good barrel, it comes with a good bolt anyway, so there's also that. As we've all seen any BCG is hard to come by these days, and the best BCG's are unobtanium for the most part. Guys are having a hard time finding parts of all kinds. I was nice enough to let a barrel with low pro gas block and tube and handguard go to a good guy here for a steal this week because said parts are getting harder to find. Luckily I'm still able to find parts locally and plan on replacing the barrel with a matchgrade barrel later on. What gets me is there are guys here that are needing parts and I know a lot of you have tons of parts, but I have not seen you offer to help your fellow AR shooter out or a new AR shooter out with a good BCG, but you'd rather criticize what kind of parts the damn guy buys when times are tough. I say get off your fu cking high horse. You got all that from a picture with two red arrows? Arrows are arrows.
"I can't be canceled, because, I don't give a fuuck!" --- Kid Rock 2022
Holocaust Deniers, the ultimate perverted dipchits: Bristoe, TheRealHawkeye, stophel, Ghostinthemachine, anyone else?
|
|
|
|
Joined: Sep 2006
Posts: 23,659 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,659 Likes: 1 |
Not to put words into Blue's mouth, but, IMHO, he's just pointing out that the particular bolt in that BCG is being advertised as "Mil-Spec" as indicated by the arrows he drew.
While the bolt from 9310 may well be every bit as good or better than what the Mil-Spec calls for, which is C-158, it's still not "Mil-Spec" from the material standpoint, hence the advertising is somewhat misleading (for many) & is not accurate in calling that bolt "Mil-Spec". And they are NOT selling that bolt to any agency that is specifying & buying to Mil-Spec requirements, which is implied in their write up. (Why do you think that people like Toolcraft & Colt still make bolts about of C-158? Actually TC uses both materials, but anything going to a .gov, buying to "Mil-Spec", is C-158)
It has nothing to do with whether that particular bolt from that particular manufacturer is either good or bad.
Just the way it is..........................
But for all you all, make of it what you like, & buy whatever makes you happy from whoever you want to buy from.
MM
|
|
|
|
Joined: Jul 2005
Posts: 5,699 Likes: 5
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2005
Posts: 5,699 Likes: 5 |
buy whatever makes you happy from whoever you want to buy from.
This.
|
|
|
|
Joined: May 2007
Posts: 14,654
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2007
Posts: 14,654 |
Good parts aren’t hard to find. Good parts at prices from 12 months ago are hard to find. I’ve seen good BCGs, barrels, and complete uppers and rifles in the last couple of weeks. It’s called the internet. There’s stuff there. $160 https://www.fightmasterfirearms.com...fWvWMBu-ICIFJeDuqly90E6oDctse8bkMX7AbXNs
your flippant remarks which you so adeptly sling
|
|
|
|
Joined: May 2007
Posts: 14,654
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2007
Posts: 14,654 |
Not to put words into Blue's mouth, but, IMHO, he's just pointing out that the particular bolt in that BCG is being advertised as "Mil-Spec" as indicated by the arrows he drew.
MM Well, you would think that. Because you’re a smart guy. I zeroed the Geissele yesterday for a hunt tonight. I’m not sure if a $300 BCG with a non-mil spec bolt makes my horse higher nor shorter. Hopefully it doesn’t break.
your flippant remarks which you so adeptly sling
|
|
|
|
Joined: Nov 2002
Posts: 18,476 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2002
Posts: 18,476 Likes: 2 |
Unfortunately, out of stock. Shows in stock, but won't let you add it to your cart.
|
|
|
|
Joined: Jun 2008
Posts: 6,082 Likes: 3
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2008
Posts: 6,082 Likes: 3 |
Here’s a Spike’s (FN) CHF mid-length barrel. It’s in stock, and comes with a $25 gas block. Not the deal of the century, but only $50 more than a lot of mediocre stuff, that can’t even be found, now.. https://aimsurplus.com/spikes-tactical-16-st-fn-chf-5-56-barrel-w-pinned-mid-length-lpgb/Screw it on a $50 Anderson stripped upper, put a $14 Aero gas tube on, and get a $55 Matrix Arms Foxtrot handguard from Joe Bob, and call it a day...
|
|
|
|
Joined: Sep 2006
Posts: 23,659 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,659 Likes: 1 |
I zeroed the Geissele yesterday for a hunt tonight. I’m not sure if a $300 BCG with a non-mil spec bolt makes my horse higher nor shorter. Hopefully it doesn’t break.
Well, after all it is a Geisselle...........................should be good for at least one hunt anyway. LOL Is that their Nano-Coated, whatever they call it, BCG? I will have to say that some of the better coatings or surface treatments do make cleaning the carbon off bolt stems waaaaaay easier. DLC in particular is really slick............you can actually feel the difference in how smooth the carrier rides in the upper too. Coupled with good material, i like the better coating over manganese phosphate. MM
|
|
|
|
Joined: Sep 2010
Posts: 31,438
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 31,438 |
Last edited by MtnBoomer; 01/26/21.
"I can't be canceled, because, I don't give a fuuck!" --- Kid Rock 2022
Holocaust Deniers, the ultimate perverted dipchits: Bristoe, TheRealHawkeye, stophel, Ghostinthemachine, anyone else?
|
|
|
|
Joined: Nov 2020
Posts: 39
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Nov 2020
Posts: 39 |
Don't tell that to the guy on utube that shot 8000 rds without a problem
|
|
|
|
Joined: Nov 2020
Posts: 39
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Nov 2020
Posts: 39 |
Don't tell that to the guy on utube that shot 8000 rds without a problem
|
|
|
|
Joined: Feb 2011
Posts: 5,856
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2011
Posts: 5,856 |
Don't tell that to the guy on utube that shot 8000 rds without a problem That's called a sample of one.
|
|
|
|
632 members (12344mag, 160user, 10gaugemag, 06hunter59, 16gage, 19rabbit52, 69 invisible),
2,827
guests, and
1,307
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,644
Posts18,512,394
Members74,010
|
Most Online11,491 Jul 7th, 2023
|
|
|
|