I was given a bag of parts by a guy who said this came out of a model 500 mossberg that he sold. I’m usually pretty good at putting this together but it had me stumped so I looked at the parts for a 500 and these are different from the schematics on line. Is it an older style? Any help would be appreciated. Regards. [url=http://][/url]
Figured it out without the springs. I’m not sure where they all go. I know where a couple go up front and the hammer plunger but the small round coil spring appears to go behind the trigger in a hole but isn’t long enoug. Maybe there is a little plunger that supposed to go in there.. Only if I had a a schematic to see where they all go. It appears the slide lock may be missing, here it is without springs. [img]http://[/img]
I figured out what type of trigger group it is but cannot find any schematics or parts diagrams to determine how the twisty type springs are installed. It is a Mossberg Lighting Pump Action (LPA) group. If anyone can point me in the right direction for assembly or take pictures of the inside or theirs so I can see how the springs are oriented that would be great. Regards,