Home Forums Hunting & Shooting Hunter's Campfire Best 2 Stroke Oil

I run 32:1 in everything I own and pick the oil based on the application. Jet accordingly if carbureted.

Amsoil Interceptor, or Motul 710 are top choices for non-WOT operation that needs clean burning characteristics.

Motul 800, Klotz R50 or Super techniplate, Maxima Castor are all top choices for ring the guts out of it applications.

For years I ran a 1990 Merc 25 horse. I ran 100/1 Merc in it for a long time. Never a problem. Then I get a 1997 Merc 25 horse. I ran the cheap stuff @ 50/1, but smelled a lot. I went to Amsoil , @ 128/1 for a long time. I figured I should just run 100/1 and did for 5 yrs? Then I got a much of Merc TCW3 and ran that for about 8 yrs now at 64/1 and will stick to that cause it does not smell much . In 25 yrs. of running this Merc, I dont think it matters much and likely 100/1 is fine but they want you to feel "safe",, or "more oil is cheap insurance". For 30 yrs now I had my Stihl 034. Still has lots of compression. I ran stiihl oil 50/1, then for 10 yrs. I ran Amsoil 100/1 . However now I just run 2 oz. per gal. for a mix of 64/1. Again, I bet I could run it for a long time at 128/1 and never have a problem I have never had an engine go bad on my . My trucks and cars get changed every 10,000 mi. and have gone as long as 46,000 with 3 filter changes in my truck , still have the truck and 293,000 and runs perfect.

Granpa was a Siciliano.

Cheapest olive oil there is.

Melted butter or chicken fat works too.

Or the used oil from the McDonalds fryers. Nothing like smelling french fries while weed whacking to get a man's appetite up for dinner.

Straight 3-in-1 oil with a quart of Lucas.

Klotz...

More oil talk, lets hear it !!

I’ve became partial to Lucas

Evinrude XD100 in everything. Boats, lawn equipment, etc. At recommended gas:oil ratio. It is clear, unlike most 2 stroke oil which is dyed so you know it’s mixed. Not a problem, as I always date my 2 stroke cans with duct tape and a sharpie.

Don’t currently have an outboard but run premix VP Racing Fuel for my saws, trimmer and blower. 50:1 in the gallon can 93 octane. My Stihl saw hates old gas but runs great on the VP stuff.

I've been using a low smoke synthetic oil from Cabela's for the last 23 years in my Johnson 25. It works but they don't sell it anymore.

I haven't watched this video but I was planning to.

Blendzall

I love the castor oil stuff. Glad they make it againBlendzall

I use the Stihl $32 a gallon premix

Money is no object, only fetch my BBQ from brick n mortar too.

If I had some of them white navy O-6 pants, I’d weed eat in them with a square starched ass box

Castor927 for the ktm

Polaris synthetic 2-stroke oil for the snow go smells like cotton candy...yum....

Plain ole castor bean oil was the top of the line untill the mid 70,s. I still add it to my gas in my old bikes just for that racetrack smell even then its a superb lubricant. I buy it by the gallon for soapmaking some goes into my muzzeloader patch lube as well, bean oil is super sticky and stays stuck on operating mechanism's and other fine assembly's. In WW1 it was used in rotary engine aircraft and it was not uncommon for pilots to return from flights after discovering that farts can have lumps in them.

Hell back when I got my lawsuit money from when i slipped down on peepee , hell i run pure nitrix oxide in my old saw.

Wish ya well Mike and hope it works out for ya...

If I had those thoughts tho, my luck, she would be 400+ pounds, ugly as a warthog, three teeth left... and smells like Big Schtick...B.O. and Dead Fish smell....

best of luck my friend...

I use Opti-2 in my saws, weedeater, blower. One mix for all 2 strokes, with non-ethanol gas.

amsoil is the best.

Dickies or real ber-ba-kue??