Here is one that was "discovered" and didn't come from a collector. It is FAR from a safe queen but finding a 36 that hasn't been boogered up is getting hard. No extra holes or pad and it even has the short tang receiver sight so the stock wasn't notched. Serial number 6,2xx. I plan to scrub the bore tomorrow and hopefully shoot it in the next week or so if the snow ever quits.
Congrats! With 'notations'. Believe per SN, yours actually considered "third year" production. See below. I also do believe your diopter/peep, etc sight (not "tang sight"), is indeed "inletted". Were it original, it would have to be as the last Model Lyman not offered until post WWII! That Lyman could indeed have been a "factory optional installation", but inletting mandated. Even then, it could have been original factory installation. The "evidence of a missing barrel boss sight OR original dovetail blank installed. Would strongly suggest aftermarket. Also, many collectors reflect the principle that without factory documentation of accessories "factory installed"; conclusively presumed as "aftermarket". Appearing quite early era style nuanced floorplate release button which if any intentional early era faking, that will be forgotten.
What you have a nice, functional 'almost original' and yet quite early Model 70. To celebrate that find! I can't see the barrel nomenclature but if 30-06 it should be presented in format: "30 GOV'T 06" and the barrel underside marked NLT than perhaps "38" for actual assembly date of manufacture. (Collectors 'call DOM by serial #). A lesser altered factor is the barrel length and resulting sight ramp alterations. If those are consistent, likely all else comporting.
Factory Records Model 70 SN Ref: 1935 - 1 TO 19, '36 - TO 2238, '37 - TO 11573
Just a quick take and "calling as I see them" inclusive of the conclusion, I'd enjoy enjoying such a 70!
Iskra, thank you! My "Blue Book" shows the DOM and production numbers the same as you posted but my Winchester book shows 1935 S# 1-4 and 1936 S#5-about 7,000 (I don't have the book in front of me). The sight must be a later addition as the stock is not notched. I pulled the action out of the wood to wipe it down and verified this. As I said, it is certainly not a safe queen but is a solid and honest old rifle that I was happy to find.
Originally Posted by 99Ozarks
What level did you find it on?
It was on the upper level in the far corner. As you came in the main door it would have been at about 1 o'clock up against the wall. The gun had rusty bolt action shotguns and other "junk" but I spotted this in with them.
Youβd need a Stith mount too and the bolt handle would still probably not clear a Leupold ocular. A Stith and Lyman Alaskan would be the ticket for that gun.
"When the going gets weird, the weird turn pro." Hunter S. Thompson
Youβd need a Stith mount too and the bolt handle would still probably not clear a Leupold ocular. A Stith and Lyman Alaskan would be the ticket for that gun.
I have an extra Lyman Alaskan but I think I am out of Stith mounts. I have 3 rigged up that way now and they shoot better than I can.
My bad on that "quick take" receiver sight misconstrue. Multitasking where I shouldn't have tried!
I'd counsel against the scope installation unless you're really set on it. I have several Stiths on my prewar Model 70 rifles in 30-06, 270 Win both from 1942 & a SG 70 .257 Roberts from '39. Wearing a Lyman Alaskan, a Weaver 440 & a Weaver, don't recall model; respectively. See SG pix. All came to me 'as nesting' on respective rifles. I wouldn't remove them as packages 'ostensibly' original but for the aft sights removal, necessitated by Stith mounting. Notable, the fact that era scopes were delicate & host guns were most often "babied". Likely difficult to find a wear-matching scope & Stith mount belying subsequently 'tacked on'!
I'd just enjoy that honest principally prewar vintage setup you now have! If you want a scope friendly Model 70 go into about '48 year+ vintage when the Factory was offering D&T standard. Earlier D&T "non-collector bargains" will be custom drilled specs and who knows what likely obsolete mount such to fit! The Stith was a 'make do' adaptation. Great for collectors but also 'clunky are us' for contemporary users.
If you must have your Stith 'moment in the Sun', the Lyman Alaskan as recommended above at least presents a much more contemporary/classic image! Be sure to note the 7/8" tube diameter! Stiths were not "universal bases!
Again, just my own 'quick take'! Good Luck & Best! John
A different solution is to scope it as the factory intended in those early years. Utilizing the two holes on the receiver and the barrel dovetail, install a pair of target scope blocks and install a Lyman 5A or Unertl/Fecker Small Game scope (or even a Unertl/Fecker target scope). (Don't let the name fool you - Small Game scopes were game scopes that were small in comparison to the target scopes, not necessarily for small game. Excellent optics that carry over nicely into the "modern" era.) The bolt handle will clear it handily. Easy on-and-off when the irons are preferred.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
A different solution is to scope it as the factory intended in those early years. Utilizing the two holes on the receiver and the barrel dovetail, install a pair of target scope blocks and install a Lyman 5A or Unertl/Fecker Small Game scope (or even a Unertl/Fecker target scope). (Don't let the name fool you - Small Game scopes were game scopes that were small in comparison to the target scopes, not necessarily for small game. Excellent optics that carry over nicely into the "modern" era.) The bolt handle will clear it handily. Easy on-and-off when the irons are preferred.
Another excellent option for scoping a pre-war gun Gary
"When the going gets weird, the weird turn pro." Hunter S. Thompson
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."