|
|
Joined: Apr 2013
Posts: 1,970
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2013
Posts: 1,970 |
Maybe try the remington society Okay, thanks
|
|
|
|
Joined: Nov 2013
Posts: 28,984 Likes: 26
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2013
Posts: 28,984 Likes: 26 |
TheKid, I think making one is probably my best option. Not a lot of spare parts with less than 17,000 total made. I have a couple of dovetailed sights, I’ll have to measure later and see how they compare. Making one should be pretty easy. Measure the slot and buy a piece of brass stock of the proper thickness. Cut and file to fit. Drill for the pins or use epoxy. You can color the sides with paint pens and leave the aiming point bright, or paint it to your taste. Ask here about the proper height, then leave a bit extra to be safe. I’d set the rear to the middle elevation position, then file the front to zero. That should give you plenty of adjustment on tap.
What fresh Hell is this?
|
|
|
|
Joined: Apr 2013
Posts: 1,970
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2013
Posts: 1,970 |
TheKid, I think making one is probably my best option. Not a lot of spare parts with less than 17,000 total made. I have a couple of dovetailed sights, I’ll have to measure later and see how they compare. Making one should be pretty easy. Measure the slot and buy a piece of brass stock of the proper thickness. Cut and file to fit. Drill for the pins or use epoxy. You can color the sides with paint pens and leave the aiming point bright, or paint it to your taste. Ask here about the proper height, then leave a bit extra to be safe. I’d set the rear to the middle elevation position, then file the front to zero. That should give you plenty of adjustment on tap. Good bit of advice, thanks.
|
|
|
|
557 members (06hunter59, 222Sako, 21, 12344mag, 10gaugemag, 22kHornet, 62 invisible),
2,646
guests, and
1,245
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,382
Posts18,527,587
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|