Joined: Nov 2013
Posts: 317
Campfire Member
OP
Campfire Member
Joined: Nov 2013
Posts: 317
This brass is being sold as once fired Lapua Brass, however the headstamp is not any of the standard Lapua headstamps I have seen before. Can anyone verify if this is in fact 1st quality Lapua manufactured brass ?
Attached Images
Joined: Jun 2005
Posts: 2,195
Campfire Regular
Campfire Regular
Joined: Jun 2005
Posts: 2,195
send an email to Lapua, they should know.
Ride well, shoot straight, and speak the truth.
Joined: Apr 2012
Posts: 1,296
Campfire Regular
Campfire Regular
Joined: Apr 2012
Posts: 1,296
Couldn’t post what the other guy did.
Last edited by anothergun; 10/16/23 .
Joined: Feb 2004
Posts: 10,119
Likes: 4
Campfire Outfitter
Campfire Outfitter
Joined: Feb 2004
Posts: 10,119
Likes: 4
Your link doesn't work as posted. After figuring out why, I see the pic below. Are you referring to #8? If so, it's not the same as the OP's.
Joined: Apr 2012
Posts: 1,296
Campfire Regular
Campfire Regular
Joined: Apr 2012
Posts: 1,296
His post was kinda hazy but “L” inside the logo is missing. I can’t figure out why the attachment managers doesn’t work for me
Last edited by anothergun; 10/16/23 .
Joined: Feb 2004
Posts: 10,119
Likes: 4
Campfire Outfitter
Campfire Outfitter
Joined: Feb 2004
Posts: 10,119
Likes: 4
I can’t figure out why the attachment managers doesn’t work for me
Edit it if you're not past the time limit and take out the
http://. Leave in the
https://.
Joined: Aug 2010
Posts: 612
Campfire Regular
Campfire Regular
Joined: Aug 2010
Posts: 612
I have a question, I just bought some Lapua brass and in the primer hole the pocket is raised up like a dome, does this brass take a different primer?
Joined: Apr 2012
Posts: 1,296
Campfire Regular
Campfire Regular
Joined: Apr 2012
Posts: 1,296
Send a pic....might need uniforming. Does the primer fit ok ?
Last edited by anothergun; 10/16/23 .
Joined: Aug 2010
Posts: 48,225
Likes: 25
Campfire 'Bwana
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,225
Likes: 25
send an email to Lapua, they should know.
That's the best answer. Don't know if the OP is getting a stellar deal on that brass or what? Personally I'd move on and buy something different, if unsure about manufacture. There are other brands out there that will work just fine. Trust me..
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style.
You want to see an animal drop right now? Shoot him in the ear hole.
BSA MAGA
Joined: Apr 2012
Posts: 1,296
Campfire Regular
Campfire Regular
Joined: Apr 2012
Posts: 1,296
I heard that you don’t have anneal Lapua!
Joined: Jun 2005
Posts: 2,241
Likes: 5
Campfire Regular
Campfire Regular
Joined: Jun 2005
Posts: 2,241
Likes: 5
I have a question, I just bought some Lapua brass and in the primer hole the pocket is raised up like a dome, does this brass take a different primer?
Sounds like it was made for Berdan primers. Does it have two small flash holes on either side of the "dome"?
Too close for irons, switching to scope...
Joined: Apr 2012
Posts: 1,296
Campfire Regular
Campfire Regular
Joined: Apr 2012
Posts: 1,296
That’s what l thought at first but l never saw commercial brass berdan primed.
Joined: Nov 2005
Posts: 23,139
Likes: 6
Campfire Ranger
Campfire Ranger
Joined: Nov 2005
Posts: 23,139
Likes: 6
That’s what l thought at first but l never saw commercial brass berdan primed.
Common in commercial brass made for European sales.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
Joined: Mar 2019
Posts: 1,267
Campfire Regular
Campfire Regular
Joined: Mar 2019
Posts: 1,267
This is where I found the manufacturer of some 7.62x39 brass I have. I briefly looked for the headstamp in the op but didn't see it.
https://cartridgecollectors.org/headstamp-codes/
Think. It's not illegal, yet.
Joined: Feb 2008
Posts: 509
Campfire Regular
Campfire Regular
Joined: Feb 2008
Posts: 509
The latest Lapua brass is properly annealed by Lapua. I like this brass though the price is a bit hard to choke down. From what I can tell Lapua uses an alloy with a bit less zinc so it is softer like Rem vs Winchester. I can tell the difference just by color as the more zinc yields a case that is brighter. The higher zinc % the more rigid and much more easily machined. One isn’t always better than the other. You can easily see the difference in a case trimmer and feel the difference as the higher zinc% the shorter and sharper the chips where less zinc more copper often leaves longer tailings. I’ve alway found Lapua fire forms with sharper cleaner shoulders and less pressure Rick
Joined: Aug 2010
Posts: 612
Campfire Regular
Campfire Regular
Joined: Aug 2010
Posts: 612
The brass only has one flash hole, I can not seat the primer in fall the way they will not chamber in the gun.
Last edited by BooBear; 10/16/23 .
Joined: Apr 2012
Posts: 1,296
Campfire Regular
Campfire Regular
Joined: Apr 2012
Posts: 1,296
Joined: Aug 2010
Posts: 612
Campfire Regular
Campfire Regular
Joined: Aug 2010
Posts: 612
Joined: Apr 2012
Posts: 1,296
Campfire Regular
Campfire Regular
Joined: Apr 2012
Posts: 1,296
No thanks Do you have a hard time seating a primer?
Joined: Aug 2010
Posts: 612
Campfire Regular
Campfire Regular
Joined: Aug 2010
Posts: 612
Yes the center of the dome prevents the primer from being seated flush with the base of the head of the brass
573 members (10gaugemag , 17CalFan , 1badf350 , 1lesfox , 1234 , 60 invisible),
2,637
guests, and
1,305
robots.
Key:
Admin ,
Global Mod ,
Mod
Forums81
Topics1,193,717
Posts18,514,165
Members74,010
Most Online11,491Jul 7th, 2023