Home Forums Hunting & Shooting BPCR Blackpowder source

Any available in the Dallas, Tex area?

Butch,
25Lb minimum
https://www.trackofthewolf.com/List/Item.aspx/1190/1

or
https://www.buffaloarms.com/black-powder.html

P.M. sent

I buy all of my black powder from Traveller's Antiques.

Thanks for the help.

Bear River powder Evanston wyo. Craig Kirkland good guy to deal with.

I buy all my BP from Buffalo Arms Co. Usually in 25 lb. cases to save on the hazmat fee since it's the same fee for one pound or 25 lbs.
Powder Valley is also a good source.

I got my last bunch from Grafs. They had good prices and are veteran friendly.

Since the NSSA grounds are nearby, we have a local dealer with literally tons, plus caps etc.

I've shot up a sh*tload of powder from that bunker in Winchester, VA! We would buy it in 25-pounders at a time (a half dozen of us blackpowder shooters in Hagerstown) and take turns driving down to make "the buy". One time one of the guys (his first trip) rolled into the driveway with it strapped down in the bed of his pickup truck, and he was wearing a hard hat, safety glasses, ear plugs, and welders gloves! We pointed out that if that keg of powder had blown up during the 50 mile drive none of that safety gear would've helped him in the least!

Back Creek Gun Shop in VA. Good prices, plenty of supply, good people. Swiss - GOEX - Schutzen. You can purchase any quantity you want.

Definition of "area"?????

I thought I said the Dallas, Tx area.

Schuetzen Black powder (Swiss) is located in Arlington Tx.

Coonie's Black Powder, Hobbs, New Mexico

Powder Inc, Clarksville, AR

Not in Dallas area, but a couple more sources.

Thanks!

Bear River powder ,Evanston ,Wyo. Craig kirkland. As good as any better than most. Google it

My last two sources were a) the NMLRA shoot in Friendship IN (only members can buy) and b) I'm making my own.

Homebrew Black Powder

The method I use, called Ricing, simply puts the damp mix through a screen, and then crushed and dried. If you go the homebrew route, you will instead need to take the damp mix and run it through a hydraulic press and make compressed pucks. This associates the Nitre with the charcoal much better, and you end up with a denser powder.

Ricing was the only way they made BP up until about 1800. I'm mostly using mine in a Brown Bess Musket, so what I'm doing is fine for this purpose. After 1800, the additional step of pucking made the denser powder that BP cartridges are based from.

Surprisingly, my first batch of homebrew turned out remarkably well. I had expected 120 grains to do the work of 80 grains of Goex. The end result was closer to 1:1, and it burned remarkably clean.

You need a good charcoal source. I used Ailanthus. It grows like a weed in my hard. Willow is great. However, the latest fad is toilet paper. You can reduce a roll of toilet paper and get the absolute finest BP out there.

Here's the Bible: https://castboolits.gunloads.com/showthread.php?103852-My-homemade-black-powder

So toilet paper makes better black powder? I imagine I can use used toilet paper and even get nitrogen out of it.. If anyone tries it , let me know how it goes. Kidding aside , toilet paper is better?

Reach out to a muzzleloading club near you. They will point you to someone.