Home Forums Hunting & Shooting Custom Rifles & Wildcats RIFLE BLUEPRINTS ONLY!

Montana 1999 CM LH action
24-inch Krieger #2 Standard Sporter contour chambered in 7mm-08
Williams one-piece bottom metal
Williams extractor
VX-III 2.5x8 in STD bases and rings
McM Classic stock painted gray (obviously)
Built by Mark Penrod of Penrod Precision

A very boring rig. Largest group shot thus far measured 0.951" at 100 yards, smallest was 0.366" using a load consisting of a Sierra 140 grain Game King over 40.5 grains of VV N140 in R-P brass and a Remington 9 1/2 primer. (Average velocity 2733 FPS.)

My first custom,



Weatherby Vanguard action
Timney Trigger
Hart barrel, chambered for .30-06, 23" length, 1-10" twist
McMillan swirly stock, 80% forest green, 20% black
Leupold bases and rings, VX-III 3x9x40mm scope

My first custom, just picked it up today (sorry for the giant pics)







Rifle's Inc. Titanium Strata
Titanium M700 lightened/blueprinted
Lapped/face trued Spiral fluted bolt w/ titanium firing pin
Teflon Coated
Green Camo Lightweight Kevlar Rifle's Inc. stock
Trigger worked at 2.5 lbs
23" Lilja chambered in .270 Wby + slim brake II
Talley LW Rings and bases
Swaro Z6 2-12x50 Ballistic Reticle

Not sure of exact weight yet, but should be 6 lbs +/- as pictured. It's darn light with great feel and balance.

Test target: .4" with weatherby factory 140 gr. Nosler Accubond (I requested it shoot factory ammo)
Avg muzzle vel: 3275

Very nice! Is the bolt shroud an off the shelf item or custom?

thanks big. custom by Rifle's Inc.

What a beautiful rifle.I have always heard great things about Rifles Inc as far as weight, performance and all around quality.Can't be a better all around NA Hunting set up!

McWhorter Custom LH 300wsm. Jewell Trigger, HS Precision Varmint Stock, 26" PacNor SuperMatch barrel, Wyatt Ext. Mag box. S&B 4x16x50 with TDS Reticle. Shoots bug holes(.19) with 180AB's.

Here is one Shawn Carlock at Defensive Edge built for me some time ago.

30-naught 6, trued, tubb lug, Harris #5 24 inch barrel in an HS Precision stock. Did the paint myself.

Mauser vz-24 action, A&B F14, 22in barrel in 6.5 x 55. Hi tech stock, Talley LW with Leupold VX11 2-7 scope, Timney trigger.
Weighs 7 lbs loaded.

Couple new ones:




Details:
257 Weatherby
Remington 700 SS LA
Rock Creek No. 3 Contour fluted by Karl and finished at 25.5"
1:10 twist
McMillan Mountain Rifle Pattern in Edge fill
ADL
Talley LWs
Leupold VXIII 3.5-10x40
Weighs 7lb 5.7oz as you see it, and 6lb 5.5oz bare (no scope/rings)



Details:
280 Ackley Improved
Older model (no prefix) Remington 700 LA
PacNor No. 1 Contour 1:9" twist finished at 23"
McMillan Classic in GAP Camo 13.75" LOP
Williams ADL Triggerguard
Talley LWs
Leupold VXIII 3.5-10x40
Sprayed with Matte Black Duracoat.

Redneck aka Lee Christianson did the barrel/chamber work.

Weighs 8lbs 5.5oz as seen here...

I'm in. Sort of a M70 "Win-dero"
.300 Winchester Magnum
Winchester M70 Classic Super Grade Donor Action, Blueprinted
Ron SMITH (RKS)Stainless barrel, 29" 1-in-10 twist Cerakoted Black
Nightforce +20 MOA Rail and Rings
Leupold Mark4 3.5-10x40 TMR

Bottom metal and trigger are stock with only a trigger job done years ago. Trigger may get changed some day, but for now it's fine. Stock is the original stock as well.

All work performed by Rick Timmins of Alberta Tactical Rifle Supply in Calgary AB. Finished at 12 lbs, give or take. My postal scale only reads to 2 lbs!

[img][IMG]http://i154.photobucket.com/albums/s269/thismortalcoil2007/King.jpg[/img][/img]

1910 Mexican Mauser, completely reworked by Stu Satterlee in 338FED.

Love that gun, I have a 1936 Mexican being built right now. What kind of stock is that?

Thats a Sako Classic, in was inletted by the smith. All work as done by Stu Satterlee. I'm going to take her for a test run this weekend. Bought some 185gr TSX and 210 Noslers. I have 2 more mexs in the works, not sure what they will grow up to be.

Finally got around to getting these completed and scopes mounted.

Sako- 75
6mm BR
Lilja 10 Twist
Leupold 4.5-14 x 40
Eddie Harren Did the chambering


20 Dasher
Bat- SV
Jewell HVR
Hart 9 Twist
McSwirly Mchale
Leupold 6.5-20 x 40 LR
Greg Tannel Chambering.




.17 Javelina Improved
Cooper- 38
Pac- Nor 10 Twist
Leroy At Canyon Creek did the stock Work
Blank from Cecil Freddi
Eddie Harren did the chambering
Leupold 6.5-20 x 40 LR
Need a more classic scope on it.








[img]http://img.photobucket.com/albums/v648/Mntngoat/Firearms/DSC00398.jpg[/img]

[img]http://img.photobucket.com/albums/v648/Mntngoat/Firearms/DSC00399.jpg[/img]

ML

Very Nice!

Ruger #1



.17 Killer Bee
Octagon barrel
Custom, safety button
Custom Rib with Talley QD rings
Leupold fixed 12X with .067" dot
Bedded/ free floated forend
Flush mounted swivels
9 lbs. 10oz.

ML

These got moved from the previous post

Sako- 75
6mm BR
Lilja 10 Twist
Leupold 4.5-14 x 40
Eddie Harren Did the chambering


20 Dasher
Bat- SV
Jewell HVR
Hart 9 Twist
McSwirly McHale
Leupold 6.5-20 x 40 LR
Greg Tannel Chambering.

Stiller Predator Short Mag
Lilja #2 Contour 1 in 10 23"
Muzzle Break
.300 WSM
McMillan Hunter EDGE Stock
Jewel Trigger
Talley Lightweight Rings
Leupold 2.5-8 B&C
6lb 15oz Loaded

Got another back today.

Sako- 75
.20 Duster By Greg Tannel
23" Pac- Nor Factory Contour
Bedded Factory Stock
Factory Trigger
Zeiss Conquest 4.5 - 14

9 Lbs 6 Oz










ML