|
|
Joined: Mar 2004
Posts: 140
Campfire Member
|
OP
Campfire Member
Joined: Mar 2004
Posts: 140 |
I just got home with a new CZ 550 American in 9.3/62. Where can I buy new factory brass for it? I have New Redding dies, 250 gr Nosler Ballistic Tips,and RP 35 Whelan brass that necks up fine. I cant make a false shoulder with current set up so Im wondering if the controlled feed extractor and seating the bullet slightly into the rifling will suffice for fire forming.
|
|
|
|
Joined: Jul 2001
Posts: 60,134 Likes: 9
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,134 Likes: 9 |
UncleRupe--
The throat in CZ 9.3x62's is VERY long, so it would be tough to seat bullets out to fireform a shoulder. Wait for the factory brass. It has worked very well in every 9.3 I've tried it in, incpouding my own CZ 550. n fact I have yet to try a bullet yet from 232 Norma and 250 BT to 286 Nosler and X that doesn't shoot under an inch.
JB
|
|
|
|
Joined: Sep 2002
Posts: 5,673
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2002
Posts: 5,673 |
Rupe, If Sinclair doesn't have the brass in stock, Huntington's does. Huntington's
|
|
|
|
Joined: Mar 2004
Posts: 140
Campfire Member
|
OP
Campfire Member
Joined: Mar 2004
Posts: 140 |
Thanks guys, for the quick response. I have a Speer book that shows drawings of the 9.3/ 62 and the 35 Whalen. In lokking them over I sae that they were a couple thousands off here and there and I would probably wind up with lopsided cases at best. I went on the internet last night and found some Lapua brass at Midway, Ive got a hundred rounds coming that will probably last me a long time. This internet chat room stuff is new to me and I find it very rewarding. Thanks again.
|
|
|
|
577 members (12344mag, 1936M71, 1Longbow, 06hunter59, 160user, 007FJ, 61 invisible),
2,134
guests, and
1,260
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,046
Posts18,482,225
Members73,959
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|