I posted this in the European forum but haven't got a reply yet. I tried to delete it there but the system wouldn't let me so this is a duplicate post - but I hope it gets more action here.
It was my first day out with the Cape gun with the new rear site installed. 12 gauge side worked just dandy with low pressure 2 � inch shells. The rifle side held a surprise for me.
I had bought the piece with the understanding that the rifle barrel was 38-55. It even came with two boxes of 38-55. 38-55 cartridges chamber. Pieper made a 12 and 38-55 combo that looks just like my gun. In short, I had every reason to believe it was 38-55 except for a stamp saying so.
My first shot was with a very low pressure load. Just 6 � grains of Red Dot powder behind a 250 grain .375 projectile. The first shot did not clear the barrel.
I tapped it out with a rod and noticed that the rifling had left deep imprints from the lands. The grooves did not leave any marks on the projectile. So it was touching the lands but not filling the full bore. This is a good thing since when I put a caliper on the projectile at home (by default I had �slugged� the bore) I found that it had been reduced from .375 to .365 (actually 364.5)!
I do NOT have a 38-55. I have a rimmed, straight walled 9.xx Chambering of .365 diameter. In addition to the .365 bore I found that a loaded 38-55 cartridge is still � inch short of the rifling. Hmmm�.. What the heck is it? I don�t know yet.
The underside of the rifle barrel has numerous proof marks including �Express� but nothing to indicate the chambering. Except possibly an 8.8 stamped some distance away from all other marks.
What does 8.8 mm convert to in caliber? 364 or 365?
Could it be the old 360 Nitro Express? Does anyone have information on that cartridge (especially projectile diameter?). My gun has a patent date of 1881 so the timing would be about right....
Any other guesses? Advice?
photos attached
"Delight yourself in the Lord and He will give you the desires of your heart." Psalm 37, verse 4.
"The lazy do not roast any game, but the diligent feed on the riches of the hunt." Proverbs 12:27
I'll get some photos of the proof marks up hopefully this evening. Here are some photos of the general exterior (I know - they aren't much help for this discussion).
meanwhile - Thanks for all the input! I really appreciate the information.
I�m linking up with EvilTwin tonight and we will check specs against his 9.3x72R cartridges. More to follow�.
Last edited by Mssgn; 06/04/10.
"Delight yourself in the Lord and He will give you the desires of your heart." Psalm 37, verse 4.
"The lazy do not roast any game, but the diligent feed on the riches of the hunt." Proverbs 12:27
The rifle is in pretty nice shape. It has the "doll's head" lock-up. Not off the face though. A BP cartridge almost definitely. Mike is a Helluva nice fella. Hopefully soon I can drag him over to the Darkside!!
Be afraid,be VERY VERY afraid ad triarios redisse My Buddy eh76 speaks authentic Frontier Gibberish!
Messgn, Keep us posted as to what caliber it turns out to be. I live in the country and could use a cape gun. When I go outside at night ,to sort out a problem, I never know if I need a shotgun or a rifle. It looks like a really handy tool.
Slim1
Sometimes nothing is a pretty cool hand. Cool Hand Luke
I took a dozen or so photos of the proofs but need a better camera or better light to make them clear. So far I have identified 4 Belgian proofs. I see now where the prior owner got 38-55 from there are two stamps on the water table � one is a 38 and slightly to the right is 55. He assures me that he fired 38-55 through the gun. I see no evidence of damage and the action locks up tight, so this old girl was well built.
Here are the best pics I have so far. Found a fellow selling 9.3 projectiles and bought them. Now we just need to confirm the chamber length.
"Delight yourself in the Lord and He will give you the desires of your heart." Psalm 37, verse 4.
"The lazy do not roast any game, but the diligent feed on the riches of the hunt." Proverbs 12:27
FYI, Buffalo Arms 9.3x57R cases (based off 30-40 Krag brass)are too long, BUT 38-55 cases with a .365 bullet (jacketed or cast) works just dandy with 8 grains of Red Dot. Now for hunting load developement!
"Delight yourself in the Lord and He will give you the desires of your heart." Psalm 37, verse 4.
"The lazy do not roast any game, but the diligent feed on the riches of the hunt." Proverbs 12:27
FYI, Buffalo Arms 9.3x57R cases (based off 30-40 Krag brass)are too long, BUT 38-55 cases with a .365 bullet (jacketed or cast) works just dandy with 8 grains of Red Dot. Now for hunting load developement!
Well, that'd mean that .30-30 cases should work, too. Not like there's a shortage of those...
Humm... Really hard to see the marks in the photos. If you get better photos I can look them up in my proof marks book. I may have missed this but, is it an English gun or one from the continent?