Home Forums Active Threads This Week

Okay I’m not up on the particulars of 760s. By 5 diamond I’m referring to the checkering pattern on the forend. The shop is asking $590

Mules, FXT models.

If you were looking for one, you may never see another.

https://reason.com/2019/09/20/court...unity-and-cant-be-sued-fourth-amendment/

.458 WinMag Fraternal Twins

Marked as made in Japan. New in box. $SOLD$ shipped to you.

We used a2’s in basic and A4’s in fleet when I was in. Tried m4’s but always go back to 20” barrels and with 77’s are about the only way I shoot my ar’s any more. Suppressors make guns dirty, but would like to try a 11.5 with piston and can.

Before you go getting to sad consider the source.

Tj woulda whipped them yankys

Ok. I will restate: strategy without tactics is the longest path to victory.
Tactics without strategy is only the noise before defeat.

The South had no strategy. Lees tactics were spectacular. Spectacular noise that brought not just defeat. Destruction.

This us given strictly as info. Absolutely safe in my bolt action 16.5" 308. I used 49grs of Win 760/H-414. CCI 200 LRP. 10' in front of my chrono, 2578fps. For what ever it is worth to you as info. Not recommending this load to use in your rifle, but safe in mine. As always work up a load from below. Should be well below 50,000psi. Longer Bbls should register a higher velocity.

Get a clue, you pathetic dried up old chkunt. Nobody can stand you.

Using qualified immunity to violate the 2nd Amendment.

https://reason.com/2023/08/02/law-p...y-for-unconstitutional-gun-restrictions/

Stop projecting, DERP.

Bills will still win the AFC East

bump

Had a trip planned a few years ago to take my best friend. He'd always wanted to see it, but his cancer took him before we could go. I need to make the trip for him.

These are the guns my older son and I use.



If you have an action,the T/C black powder barrels are readily available on the secondary market and relatively inexpensive.

Might have better luck on rokslide.

Biscuit or domino cutter works great and is much, much faster.

Diesel fuel added to oil will work to clean one up.

Just make sure you're at idle only.

I'm gonna go eat a nice spicy bowl of chili for ya.

Lmao.

You're pathetic.

As an aside. I used to have a CZ 458 lott and was looking over my reloading data which confirms Riflecranks and others findings to a T. I noted short throat issues with an inability to adjust seating depth as desired. I noted a lack of versatility in loads at the time. While I didn't recognize it at the time it made for an aha! Moment when I started getting serious about 458 win load development and ran across this thread a few years ago.