I got a Cabelas special last week. My plan is to pitch the scope, have the barrel shortened (possibly lap lugs, square action face and then have the chamber cleaned up to AI depending on cost). Then it will be bedded into a Banser stock. Total cost will probably end up in the $600-$700 range but it will then be to my specs and hopefully the factory barrel will shoot.
If it is stringing and you are keeping the Tupperware stock, remove the pressure point at the foreend tip and make sure the barrel is free floated. This will probably help a bunch.
Oh as cra1948 mentioned, the scope mounting on this rifle was loose too.
