I wouldn't get my panties in a bunch over Varget & Re15's relatively poor metering. Those are probably the 2 winningest powders in rifle competition. If I was a betting man and we could verify it, I'd bet that between those 2 they have more wins than all other powders combined. 4895 would be the only thing even close and that's ancient history.
Ancient history; time to move on. AR Comp, 8208, TAC, MR-2000 will all do at least as well at a minimum & are all easier to load.
MM
Alright MM, your best suggestion for the best powder to use in a powder measure (no muss no fuss easy dropping powder like H335), that will produce the most consistently accurate loads using 68+ grain bullets? Thanks... Anyone else please feel free to answer this question as well. Currently, I'm dropping RL15 with no problems. Seems to be pretty accurate from my powder measure. I'm also going against the grain and going to try some FC range pick-up brass. We'll see how long those primer pockets hold up. I've had problems with other chamberings, using FC brass, but this brass doesn't look bad and all the pockets were very tight for their first loading. We'll see how that turns out over time..
