Case capacity of the Taylor is minimal. The 416 Rem Mag has always been considered low on case cap and it is a good 10 grains larger than the Taylor. The 416 Ruger is only a couple grains smaller than the Rem Mag and should be a more efficient shape. Would believe lower pressure loads are an advantage in a hot climate especially if dealing with DG.
A short recap. Length - Capacity and Velocity with 400 grain bullet.
416 WSM 2.050" ----78 grs,-----2300
416 Taylor 2.500" ---92 grs.------2350
416 Remington 2.850" 104 grs.----2400
416 Ruger 2.570" ----102 grs.----2400
416 Murphy 2.570" ---104 grs. ----2400
416 Dakota 2.850" ----110 grs.----2500
416 RUM 2.860" ------118 grs,-----2550
416 Rigby 2.900" -----128 grs.-----2400 (original ballistics)
416 Weatherby 2.913"-134 grs.----2600
Chart from here-
http://forums.outdoorsdirectory.com...a-416-Taylor-comparitive-case-dimensions
