Oif you want to get rid of vines and briers.....get a Brush Blender.
Straight blade with the ends bent down.
You won’t believe it.
Google “Brush Blender Husqvarna” look at the video. It works that good.
Eats honeysuckle and briars......except for the bottom of the stem. 8’ hedge you can mow over afterwards.
Just bring it down and cuts everything on the way down.
Look at the video.
That guy is gonna work his tail off in that first video. I could clear more in 10 seconds with my Billy Goat brush cutter than he did in 2 mins swinging that thing up and down. Anything under about 1-1/2”, I can run up on with the Billy Goat and it does the job.
If you can get one in there.
I do maintenance on the Appilatian Trail.......Billy Goat isn’t going in a lot of places.
And do you wanna walk it in 5 miles and back.
And a hedge of MF rose briars and vines is so dense you can’t get that goat started ......and it’s 8’ High.
I can just carve the face back.
Right tool for the job. Sometimes Brush Blender.......sometimes Billy Goat.
And the OP asked about blades on a weedwacker
