Here is a link to a good tool (huge compression head) vs. the stuff Home Depot sells

https://www.yescomusa.com/collectio...-pe-crimp-tool-ring-crimper-w-gauge-blue

I have a 3/4” and a 1/2” tool ...

You’ll also need a ring splitter (to remove a screw up compression ring after you put it on) and a cutter (anything works there) for the plex.

Here is a compression ring removal tool https://www.crimpingtools.com/produ...3-4-inch-1-inch-f1807-copper-crimp-rings
The homedepot ones work fine.

Last edited by Spotshooter; 11/20/19.
Spot shooter

www.prairiefireprecision.com