Home Forums Hunting & Shooting Rimfires Help me find a scope mount to fit the holes in my receiver!

I have a recently-acquired Winchester 69A that's been used/abused/refinished and still shoots the lights out. I am interested in mounting a scope on it. It has obviously been drilled and tapped for this purpose in the past, but I have no idea what mount the previous owner had on there.





I'm hoping someone can help me identify a scope mount that will fit these holes that are already drilled into my receiver so I don't have to drill another set and make this thing look like Swiss cheese.

As the attached photos show, the holes are about 1.65" apart, center-to-center, on the left side of the receiver. There is no cut-out in the stock, which leads me to believe this is a fairly petite, low-profile mount. I haven't come across any information about a side mount made for this action except for the Weaver 48402, which looks too big from the photos I've seen (maybe not?).

Any help would be appreciated. If you happen to have a mount that will fit it and would be interested in selling it, let me know!