Originally Posted by Cheyenne
Originally Posted by MontanaMarine
Now I have the PC9 all 'churched up'. Basically, just added a Vortex flash suppressor, and now a Primary Arms 1-6x24 optic, with the 300BO/7.62x39 ACSS reticle. Should work out for a 0-300 yard steel banger/utility gun.

Nice! I'd love to see any data points that you would like to share concerning your longer range results with that setup.

I'll share what i come up with in shooting results.

In theory, my trajectory will look like this on paper (rounded to full inches and .1 moa):

115gr FMJ, 6.0gr Unique, 1495 fps (chronographed).
Scope center height 1.9" over bore center.

Zero - 22 yards

50 yards: +1" - 2.3 moa
100 yards: -1" - 0.7 moa
150 yards: -9" - 5.7 moa
200 yards: -24" - 11.7 moa
250 yards: -48" - 18.5 moa
300 yards -81" - 26.0 moa

If those drops are reasonably close, they will line up with this reticle good enough to hit steel using the 300 holdover for 150, 400 holdover for 200, 500 holdover for 250 and 600 holdover for 300. Pretty much within 1 moa at all distances.

[Linked Image from i.imgur.com]

I realize the 9mm is honestly more of a 100 yard effective round. The further distances are just for fun.

I was watching a vid Drew put together on the channel Beyond Seclusion where he was stretching his PC9 out to 400 or so. It was falling apart at 400 as I recall, but at 300 it was doing reasonably well on torso size steel.