We bed the actions with Devcon epoxy front and rear. The lug and all receiver surfaces are drafted forward and laterally to allow release from the bedding compound. The flat recoil bearing surfaces are left flat for proper load transfer. The lug to receiver fit is quite tight, and we spray mold release on the receiver, and lug so they come out of the bedding together. I've also purposely only mold released the receiver to bed the lug in. When I want to run multiple actions in the same stock, this method works great (providing you stone off a hair of material from the lug to allow them to separate easily).
-Ian
Love to see a picture of this if you have time.
