I"ve always thought... if you are going to the trouble of doing a new barrel and a wildcat so to speak, you bit off eveyrthing and if thats a 200 buck set of dies, well that was your choice.
That being said 7x08AI and the right neck bushing in an FL neck bushing die from Redding might well be the cheapest route to go, and then you could get another rebarreled in 7x08AI....
Or you get a die blank, have them ream it with the reamer and use neck bushings... Carstensen is the name of die blanks that comes to mind, I may be off there though. Its been a bit of time since I used one.
