Those look pretty keen. A lot of folks use wax to fill the ends. The thing I don't fully understand is your parent case. Why the .444? Why not use the .460 S&W instead, probably negating the need to cut the case and also allowing for a tighter fit in the cylinders? A .454 Casull could also be utilized, which would for sure be easier to obtain.
I started making these shells back in 2001, at which time the .460 didn't exist. There was a reason for not using the 454 case, but damned if I can remember what it was. In any case, I've still got a bunch of these cut-down 444 cases on hand, so that's what I use. When I run low on 'em I'll likely switch to the 460 case.
"Tighter fit" ain't the problem. One thing I didn't discuss above was that the first time you fire these shells, you'll only get about 2/3 the shot in them because you have to fire-form the cases to fill the cylinders, as it were.
An evil snake accosted my daughter out by the old cow shed the other day but unfortunately the dread viper had hid by the time I made my next round armed with the Governor. The thing actually reared up and hissed at her.
That's a damn shame.
