|
Joined: Feb 2013
Posts: 7,739
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Feb 2013
Posts: 7,739 |
Was there ever a time when marlin wood finish varied and was not so shiny?
"Shoot low sheriff, I think he's riding a shetland!" B. Wills
|
|
|
|
Joined: May 2005
Posts: 1,864
Campfire Regular
|
Campfire Regular
Joined: May 2005
Posts: 1,864 |
.
The old Marlins, in the 30's and 40's, had an oil finish.
|
|
|
|
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,445 |
Bought an 1895 CB and CBA that were NOT shiny. Made 'em shiny.
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
Joined: May 2005
Posts: 1,864
Campfire Regular
|
Campfire Regular
Joined: May 2005
Posts: 1,864 |
.
The shine can be removed with steel wool, #0000.
|
|
|
|
Joined: Oct 2017
Posts: 2,724
Campfire Regular
|
Campfire Regular
Joined: Oct 2017
Posts: 2,724 |
Have both oil and shiny. Oil ones hunt in wet weather, shiny ones in nice weather or just shooting day with kids and grandkids they have to bring there own ammo. .22's and 30-30
|
|
|
|
Joined: Sep 2010
Posts: 4,293
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2010
Posts: 4,293 |
I just refinished my 39A golden with Frombys tung oil. Lots of patience and 1500 grit made a beautiful job.
I'd rather die in a BAD gunfight than a GOOD nursing home.
|
|
|
|
Joined: May 2005
Posts: 1,864
Campfire Regular
|
Campfire Regular
Joined: May 2005
Posts: 1,864 |
.
1500 grit? May as well use typing paper. 600 grit is about as fine as I use. After that it's steel #0000 wool. It works great for me but may not work for everyone.
|
|
|
|
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,445 |
Don't let that city-dweller with the "deer" after his name hear you doing that!
0000 works great! Restores shiny finishes to a rich lustre when followed with an old time paste wax, too. Clean surface before applying wax.
For a "flat" finish, 3M Ultra Fine "black" pads work well, also.
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627 |
.
1500 grit? May as well use typing paper. 600 grit is about as fine as I use. After that it's steel #0000 wool. It works great for me but may not work for everyone. You are confusing the two common sandpaper grading systems. P1500 is only equal to the US standard 800 grit. Still mighty fine, but not nearly as fine as it seems. Steel wool has no place in stock work, ever. That despite the fact it was used for a very, very long time.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627 |
Don't let that city-dweller with the "deer" after his name hear you doing that!
0000 works great! Restores shiny finishes to a rich lustre when followed with an old time paste wax, too. Clean surface before applying wax.
For a "flat" finish, 3M Ultra Fine "black" pads work well, also.
You are not worth any effort...
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,445 |
Pffft...you aren't able to wake up early enough...
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
Joined: May 2005
Posts: 1,864
Campfire Regular
|
Campfire Regular
Joined: May 2005
Posts: 1,864 |
.
( Sitka deer said;
Steel wool has no place in stock work, ever. That despite the fact it was used for a very, very long time.)
Little does he know--- Been using steel wool on stocks for over half a century. Works great if you know how.
|
|
|
|
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627 |
.
( Sitka deer said;
Steel wool has no place in stock work, ever. That despite the fact it was used for a very, very long time.)
Little does he know--- Been using steel wool on stocks for over half a century. Works great if you know how. Please! Please! Do not believe me! Make a sample board and look at it under magnification and do another without the steel wool and you will stand a very good chance of seeing exactly why. I did my first stock in '65. I used lots of steel wool until I found out why it is a bad idea. More to the point there are far better, easier ways to avoid the hazards produced by steel wool. I have shown many how to test it and none believed in steel wool after.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,445 |
What's next, Townie...washing your car with bird frap because its natural scouring ability on paint finishes??
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
Joined: Feb 2001
Posts: 50,627
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,627 |
What's next, Townie...washing your car with bird frap because its natural scouring ability on paint finishes??
You have no argument, whatsoever, so you want to change the conversation? More to the point, steel wool has been known as a bad thing for decades and you have not heard about it until now? Or did you ignore the advice without even bothering to test it? Please, spend a few moments and prove I am wrong.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,445 |
Defend yourself all you want (on the internet)...you OBVIOUSLY don't know how to USE materials let alone what some of them are (abrasive pads) OR how to clean your project to complete it.
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
Joined: Nov 2006
Posts: 4,419
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2006
Posts: 4,419 |
I’ve heard the no no on steel wool and on most of my projects I have chosen to ignore it and use some 0000 steel wool in my finishing process. However if I was finishing some AAA stock I would not want to take any chance. As far as grit goes I’ll actually use 1000, 1500, & 2000 at the end before I rub it out with pumice and rotten stone. I am doing a stock off of a old Sheridan pellet rifle someone gave me and going with a wiping varnish. On this yea I am using steel wool and not too worried about perfection. The rifle will be donated to my buddies place I use and be there for anyone who wishes to have a go with it, so I’m not worried about it being perfect. I have also used spray lacquer on some stocks because it is a easy finish to get a glass like finish when you aren’t worried about a finish that needs to be able to withstand harsh hunting conditions. That finish only gets wet sanding with 1000 grit or above.
Last edited by JimHnSTL; 06/20/19.
Help keep our sport going. take a kid outdoors!
|
|
|
|
Joined: May 2005
Posts: 1,864
Campfire Regular
|
Campfire Regular
Joined: May 2005
Posts: 1,864 |
.
OK, I have tried the steel wool on wood test, After cleaning the steel wool sample of wood, I am sorry, but I see no difference. The uncleaned wood has tiny pieces of steel wool in the finish, so what? It cannot be seen with the naked eye. If folks wish to NOT use steel wool, that's alright everyone has their own refinishing process. However from what I see, I will not be changing, steel wool works for me and will continue to do so.
|
|
|
|
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,445 |
Well said.
So there ya go...the SCIENTIFIC consensus is someone working with a wooden stock should C L E A N (Leftist regions may spell it c-l-e-a-n or possibly c-l-o-w-n) the surface after using ANY abrasive of their choice. Various tools, methods and products are available for this stage of "finishing"...search them, but don't use g oogle.
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
535 members (10ring1, 10gaugemag, 11point, 16penny, 10gaugeman, 160user, 64 invisible),
2,854
guests, and
1,324
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,385
Posts18,469,617
Members73,931
|
Most Online11,491 Jul 7th, 2023
|
|
|
|