|
|
Joined: Nov 2012
Posts: 73
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Nov 2012
Posts: 73 |
So I took my rifle to the range with some factory American Eagle 185 soft points and it is shooting a consistent 1.25-1.5 inch group at 100 yes. Perfect for the woods this season.
On a side note, the Zeiss that came on the rifle would not hold zero, so I changed scopes at the range and all was good. Being the great company that they are, Zeiss is replacing the scope with a brand new Z4!
When the season is over in January, I'm going to be working on loads for this rifle. I think I've decided on the 185 ttsx. Awesome to see Zeiss stand behind their product!
|
|
|
|
Joined: Oct 2008
Posts: 8,748
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2008
Posts: 8,748 |
So I took my rifle to the range with some factory American Eagle 185 soft points and it is shooting a consistent 1.25-1.5 inch group at 100 yes. Perfect for the woods this season.
On a side note, the Zeiss that came on the rifle would not hold zero, so I changed scopes at the range and all was good. Being the great company that they are, Zeiss is replacing the scope with a brand new Z4!
When the season is over in January, I'm going to be working on loads for this rifle. I think I've decided on the 185 ttsx. Good luck finding 185 TTSXs if you don’t already have them. I’m starting on some 185 GMXs because I can’t find any TTSXs for sale.
|
|
|
|
Joined: Mar 2017
Posts: 743
Campfire Regular
|
Campfire Regular
Joined: Mar 2017
Posts: 743 |
I have a Montana Xtreme X2 dunno how it shoots the only time I took it to the range I had problems with case extraction with factory Federal Fusion loads. After 3 shots I called it quits and it sat in the safe for a long time. Right now its at the gunsmith I'm guessing it has a rough chamber and the cases are sticking we'll see. There weren't any signs of excessive pressure on the cases.
I should have shot it right away when I bought it but I did not and by the time I did MRC was out of business, so I'll be paying for whatever the fix is on my dime. Hopefully honing the chamber takes care of the issue.
I'm also thinking about maybe getting the barrel cut down a bit (it's 24" from the factory) but I'd like to actually try shooting it for accuracy first as is.
|
|
|
|
Joined: Feb 2011
Posts: 5,460
Campfire Tracker
|
OP
Campfire Tracker
Joined: Feb 2011
Posts: 5,460 |
So I took my rifle to the range with some factory American Eagle 185 soft points and it is shooting a consistent 1.25-1.5 inch group at 100 yes. Perfect for the woods this season.
On a side note, the Zeiss that came on the rifle would not hold zero, so I changed scopes at the range and all was good. Being the great company that they are, Zeiss is replacing the scope with a brand new Z4!
When the season is over in January, I'm going to be working on loads for this rifle. I think I've decided on the 185 ttsx. Good luck finding 185 TTSXs if you don’t already have them. I’m starting on some 185 GMXs because I can’t find any TTSXs for sale. Jeeze! I can't find any either! Might have to go the Hornady route as well. The 185 Fusion is hard to find too. Federal uses that in it's MSR line.
|
|
|
|
Joined: Feb 2011
Posts: 5,460
Campfire Tracker
|
OP
Campfire Tracker
Joined: Feb 2011
Posts: 5,460 |
I have a Montana Xtreme X2 dunno how it shoots the only time I took it to the range I had problems with case extraction with factory Federal Fusion loads. After 3 shots I called it quits and it sat in the safe for a long time. Right now its at the gunsmith I'm guessing it has a rough chamber and the cases are sticking we'll see. There weren't any signs of excessive pressure on the cases.
I should have shot it right away when I bought it but I did not and by the time I did MRC was out of business, so I'll be paying for whatever the fix is on my dime. Hopefully honing the chamber takes care of the issue.
I'm also thinking about maybe getting the barrel cut down a bit (it's 24" from the factory) but I'd like to actually try shooting it for accuracy first as is.
Hopefully, it's an easy(and inexpensive)fix!
|
|
|
|
Joined: Mar 2017
Posts: 743
Campfire Regular
|
Campfire Regular
Joined: Mar 2017
Posts: 743 |
I hope so too. I didn't ask for price....I guess worst case it has to get rebarreled if the chamber is fubar. The honing sounds like it should be fairly simple but he has a 12 week backlog
|
|
|
|
Joined: Oct 2000
Posts: 773
Campfire Regular
|
Campfire Regular
Joined: Oct 2000
Posts: 773 |
Just picked this little darling last week. I also picked up 5 boxes of 210 TTSX. It’s currently at my smiths getting threaded 9/16x24 to be used with a 9/16-5/8x24 adapter so I can use my 338 supressor on this. Anyone have a good load for the 210 TTSX IN THE 338 federal?
Last edited by Josh Sorensen; 11/16/20.
|
|
|
|
733 members (10Glocks, 12savage, 12344mag, 01Foreman400, 10gaugeman, 1234, 79 invisible),
3,002
guests, and
1,512
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,737
Posts18,475,993
Members73,942
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|