|
Joined: Feb 2013
Posts: 1,676
Campfire Regular
|
OP
Campfire Regular
Joined: Feb 2013
Posts: 1,676 |
Ruger 77 trigger replacement? Are they easy to change with limited gunsmithing skills? And if so what do you recommend? Hunting application
|
|
|
|
Joined: Mar 2007
Posts: 2,695
Campfire Regular
|
Campfire Regular
Joined: Mar 2007
Posts: 2,695 |
Tang Safety or MKII/Hawkeye?
|
|
|
|
Joined: Dec 2010
Posts: 1,608
Campfire Regular
|
Campfire Regular
Joined: Dec 2010
Posts: 1,608 |
Rick, keep the original trigger, it is easily smoothed up. Trigger pull is easily remedied with a slightly lighter spring.
Craig boddington wrote about cutting off a coil on a 77 Ruger spring, which is fkn stupid, as the trigger has no tension on it when the bolt is open, because the spring is now too short and not properly flat.
On the newer hawkeyes, I take out the factory spring and articulate it till it's bottomed out a dozen times. It softens but doesn't loose it's length. Always puts the trigger at exactly 2.5-2.75 lbs.
|
|
|
|
Joined: Feb 2013
Posts: 1,676
Campfire Regular
|
OP
Campfire Regular
Joined: Feb 2013
Posts: 1,676 |
|
|
|
|
Joined: Mar 2007
Posts: 2,695
Campfire Regular
|
Campfire Regular
Joined: Mar 2007
Posts: 2,695 |
I've had my gunsmith adjust all my factory triggers for my tang safety and MKII M77's. Its easy to accomplish for someone knowledgeable in trigger tuning.
My tang safety rifles factory triggers have pull weight adjusted to 3.5lbs for big game. My Varmint tang safety has a long discontinued Canjar single set trigger, which is spectacular at 2lb non set & ounces in set.
My MKII rifles have Woolf trigger/sear spring kits and some polishing on the sear surface to 3.5lbs.
I had at one time a rare set trigger for the MKII made by the late Johannes Kepplinger of Austria. It was a work of art, needless to say!
|
|
|
|
Joined: Apr 2011
Posts: 15,301
Campfire Ranger
|
Campfire Ranger
Joined: Apr 2011
Posts: 15,301 |
On my Tang safety Whelen I had a Timney put in the same time I had it restocked. I believe you need to remove some wood or material for the Timney though.
Semper Fi
|
|
|
|
Joined: Aug 2010
Posts: 48,026
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,026 |
Work over the MKII, its easy to do yourself. There are diagrams on the net that show you how. Just don't go as far as they say. Also, you can go to the hardware store and buy a coil spring that is lighter in weight than the factory one. These work well in both the MKII and Hawkeye with the LC6. Generally the LC6 only needs a lighter spring and very minimal polishing. The mkII needs material removed from the sear and then polish it out. I've brought them down to a smooth crisp 2.5 pound pull. Just take your time and check periodically. Don't remove too much, or you will deem it unsafe and you'll be looking for a new sear. Ebay has them at times.
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Nov 2005
Posts: 7,505
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2005
Posts: 7,505 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied.
|
|
|
|
Joined: Aug 2010
Posts: 48,026
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,026 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too?
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jul 2011
Posts: 1,738
Campfire Regular
|
Campfire Regular
Joined: Jul 2011
Posts: 1,738 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too? LMAO, That's some funny shyt BSA, but true. RJ
|
|
|
|
Joined: Mar 2007
Posts: 2,695
Campfire Regular
|
Campfire Regular
Joined: Mar 2007
Posts: 2,695 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too? I don’t particularly care to work on triggers myself! Just sayin.
|
|
|
|
Joined: Oct 2004
Posts: 26,515
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,515 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too? We aren't all built the same. Some of us aren't good at mechanical things. I am sure there are some things you suck at too. To others, those things are simple.
|
|
|
|
Joined: Jul 2021
Posts: 774
Campfire Regular
|
Campfire Regular
Joined: Jul 2021
Posts: 774 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too? We aren't all built the same. Some of us aren't good at mechanical things. I am sure there are some things you suck at too. To others, those things are simple. Is there anything you are good at besides running your suck?
|
|
|
|
Joined: Oct 2004
Posts: 26,515
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,515 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too? We aren't all built the same. Some of us aren't good at mechanical things. I am sure there are some things you suck at too. To others, those things are simple. Is there anything you are good at besides running your suck? Go take a bullet for someone, hero.
|
|
|
|
Joined: Jul 2021
Posts: 774
Campfire Regular
|
Campfire Regular
Joined: Jul 2021
Posts: 774 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too? We aren't all built the same. Some of us aren't good at mechanical things. I am sure there are some things you suck at too. To others, those things are simple. Is there anything you are good at besides running your suck? Go take a bullet for someone, hero. You're a wealth of knowledge. Spouting off left and right and all you've killed in 1/2 dozen years is a doe. Another liberal plant the needs a side view mirror on the back of his queer head.
|
|
|
|
Joined: Oct 2004
Posts: 26,515
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,515 |
Op, all you need is a good gunsmith. I own several rugers, tang, mk2 and a Hawkeye. My gunsmith has worked all three down to the 2.5 thru 3lb pull. Smooth and crisp. There are probably replacement triggers available but I suggest you find a Smith familiar with and comfortable working on rugers. I suspect you'll be well satisfied. Holy fu ck, these triggers aren't hard to work on. Why all of you guys need a "good gunsmith" is fu cking beyond me. Learn to work on these simple mechanism's yourself. Do you have mommy put your pants on too? We aren't all built the same. Some of us aren't good at mechanical things. I am sure there are some things you suck at too. To others, those things are simple. Is there anything you are good at besides running your suck? Go take a bullet for someone, hero. You're a wealth of knowledge. Spouting off left and right and all you've killed in 1/2 dozen years is a doe. Another liberal plant the needs a side view mirror on the back of his queer head. Another sock puppet that is far from entertaining, interesting or creative. Just a useless gasbag.
|
|
|
|
Joined: Nov 2006
Posts: 4,419
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2006
Posts: 4,419 |
Very early tangers actually have an adjustable trigger. Later ones have some adjustments but not like the early ones. The Mark II and Hawkeyes as already mentioned can be tweaked to a nice hunter friendly with minimal effort. Some where I have a tang safety trigger assembly I picked up if you want to keep the original trigger as is and mess with this one. Pm me if interested and I’ll shoot you a price.
Last edited by JimHnSTL; 07/31/21.
Help keep our sport going. take a kid outdoors!
|
|
|
|
Joined: Jun 2020
Posts: 10,840
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2020
Posts: 10,840 |
the factory tang safety triggers are adjustable
FUGK CCP
It’s time to WAKE UP GOD BLESS THE USA WWG1WGA THERE ARE NO COINCIDENCES
|
|
|
|
Joined: Jul 2021
Posts: 774
Campfire Regular
|
Campfire Regular
Joined: Jul 2021
Posts: 774 |
Here is the takeaway:
1. Ruger triggers are easy to work on, it's all there in your face (that's what she said).
2. If you aren't handy, go for it anyways. You are already poised to purchase a replacement trigger, which still takes a little man skills to install. Since you already intend to buy one, what is the downside of playing with the factory trigger?
3. Paul is a useless woman, meaning she can no longer breed and is dry as hell. Maybe she can make a sandwich.
|
|
|
|
649 members (160user, 10gaugemag, 06hunter59, 10ring1, 007FJ, 10gaugeman, 78 invisible),
2,706
guests, and
1,301
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,477
Posts18,471,652
Members73,936
|
Most Online11,491 Jul 7th, 2023
|
|
|
|