.300 Win Mag Model 70
Mark Penrod Rifle
Blueprint your receiver

Install Lilja 30 cal, 1-10� twist, approx #4 contour, 26� finish

Hand polish barrel ripple free

William�s extractor installed, modified so a round can be dropped into chamber, and bolt closed

Re-contour tang

Build up and checker bolt release

William�s 1 piece bottom metal, SS

Shorten factory box for use with bottom metal

Stainless bolt handle installed, longer with less sweep and built up root.

3 panel checkering 30 lines per inch

Re-cut loading port, and cut side of bridge for ejection clearance

Drill & tap for 8 X 40 screws, Talley rings & bases stainless, 2 pairs of rings

Fit bases to receiver, Polish & de-burr rings

Polish mag follower

Jewell bolt body

Trigger re-pinned, sears surface ground & polished. Safety wing timed properly

Install Echols stock, 14� LOP, machine screw swivel studs front and back both

Paint stock

Misc. polishing of action for smoother and reliable function

Mount scopes

Range test

Leupold VX III BC 3.5x10

9.2lbs.

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]