VAnimrod suggested I put up a series of pics I took to illustrate patching bullets and later on loading same into cartridges.
Cut patch
The set up
Wetting the patch. The paper stretches a bit when you do this
Starting the wrap
Wrapping the slug. Gentle but tight roll
Smoothing the wrap and twisting the pigtail on the base
I use Rooster jacket lube to lube the patched slug
[img]
http://i6.photobucket.com/albums/y222/EvilTwinMar/PatchingSlugs009.jpg[/img]
Put a little bit of the lube on a sponge brush and gently twist in direction of wrap. Let dry
[img]
http://i6.photobucket.com/albums/y222/EvilTwinMar/PatchingSlugs010.jpg[/img]
The bullet as cast then patched. then a moosekiller
[img]
http://i6.photobucket.com/albums/y222/EvilTwinMar/Moosekillerds.jpg[/img]
Folks that use PP slugs have their own ways but this should serve as a ground zero primer. They shoot well for me. Have FUN!!