Dan: The 165 Fusion shot well right away from the 300 WSM; the tipped TBBC did not do so well.
I took the rifle out of its stock and cleaned up some things. There was some fiberglass that had been pushed into the barrel channel from where the sling stud had been drilled in. I scraped the goop off of the trigger adjustment screws but haven't fooled too much with that yet. I took some Federal 165gr Barnes TSX loads and 150gr Nosler Ballistic Tip loads out and was amazed that each load would print tight cloverleafs at 100. Moving out to 200, groups stayed within 2 inches without a problem. I'm thinking that this rifle has some potential now.
