The front mounting screw (under the floor plate hinge) should be torqued to 95 inch pounds. All other screws should be hand tight and then backed off 1/8” of a turn.
If you need further information, please visit our website at
www.ruger.com or contact us at:
Revolvers, shotguns, rifles, 10/22 Charger Pistol: (603) 865-2442
Pistols: (928) 778-6555
Serial Number History Information: (603) 865-2424
Please note: This e-mail is sent from a notification-only address that cannot accept incoming e-mail. Please do not reply to this message.
Sincerely,
Ruger Firearms