here's what I use.....buffing wheel & polish compound........with it you can.....

buff all internal parts.......hammer nose...ejector....lever cam....bolt slide areas......

hammer & carrier screws where they pivot.....yes...ejector silde groove in bolt...

use popsicle stick & 400 grit......do not overlook the mag tube follower....clean & polish too

along with mag tube interior....lighter main spring will help too


https://www.amazon.com/Enkay-Extra-...eywords=buffing+wheels+for+bench+grinder

https://www.amazon.com/Woodstock-D2...mp;psc=1&refRID=095SRY8TPEDD93H7JGH7

T R U M P W O N !

U L T R A M A G A !