My biggest regret was always short magazine box and Long loaded cartridge OAL to where I had no room to chase the lands. NEVER AGAIN!!!
I found that expecting a gunsmith to work cheap or for nothing is really bad thinking.
Better success is found from a gunsmith if I provide my own reamer, barrel, stock, and action.
Give written instructions to the gunsmith in great detail.
Learned this the hard way, if you are wanting a super accurate rifle, then a #4 shilen contour is minimum and #5 Shilen contour is preferable, cut the barrel short if you want to save weight on the above.
Last edited by keith; 11/18/18.