Originally Posted by szihn
That load I showed in the pics above would be a very good place to start. 46.0 of 4064 with the 200 grain Nosler.
It's slower in my rifle, than many others, but remember my rifle has a short barrel.

Your rifle may be faster.

But even being on the slow side, I can tell you that with the 200 gr Nosler Partition, it's very good for filling freezers with elk meat. And as you can see from the pics it's quite accurate. Around 5/8" at about 100 yards is what I expect from it if the rifle has a good bore and chamber.

(My range is set at 107 yards because the gully in front of the berm is at 100 ,and targets are below ground level there)


I will start there for sure.

Originally Posted by Angus1895
I was using sierra pro hunter 175 grain. # 2410

I M R 3031 regular primers.

Correction to above post.


Thanks. I will look into that also.

Why is abbreviate such a long word