Home Forums Hunting & Shooting Long Range Hunting Does the 300 prc make the 338 edge obsolete???

Print Thread

Hop To

Re: Does the 300 prc make the 338 edge obsolete??? Judman #14350804 12/08/19
Joined: Dec 2007 Posts: 16,173 Likes: 9 S.W. Wis. aalf Campfire Ranger
aalf Campfire Ranger Joined: Dec 2007 Posts: 16,173 Likes: 9 S.W. Wis.	One thing the PRC has going for it is the case length allows bigger bullets to be seated out, and still fit in a standard 3.700" mag box.

GB1

Entire Thread
Title	Posted By	Posted
Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	bsa1917hunter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Calvin	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	Dogshooter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/06/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	jackmountain	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	tuff	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	tuff	12/20/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	bsa1917hunter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	10gaugemag	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Trystan	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	peeshooter	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Spotshooter	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	sdgunslinger	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	beretzs	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	3040HighWall	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	gitem_12	12/09/19
Re: Does the 300 prc make the 338 edge obsolete???	jeffbird	12/09/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	akmtnrunner	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	MontanaCreekHunter	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	kingston	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	smokepole	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	MontanaCreekHunter	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	kingston	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	JLimbo	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	fredIII	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	joshf303	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/13/19
Re: Does the 300 prc make the 30-30 win obsolete???	joshf303	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	tuff	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	3040HighWall	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	joshf303	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Bang head on rock make rock smaller!	fredIII	12/19/19
Re: Bang head on rock make rock smaller!	joshf303	12/19/19
Re: Bang head on rock make rock smaller!	Beaver10	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Higginez	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Higginez	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Spotshooter	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	joshf303	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	10gaugemag	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Sargejustice	12/31/19

Moderated by RickBin

Link Copied to Clipboard

AX24

209 members (79S, 673, 44automag, 10gaugemag, 6mmCreedmoor, 29 invisible), 2,367 guests, and 1,148 robots.

Key: Admin, Global Mod, Mod

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Statistics

Forums81

Topics1,194,323

Posts18,526,426

Members74,031

Most Online11,491
Jul 7th, 2023

Responsive Width:

PHP: 7.3.33 Page Time: 0.105s Queries: 17 (0.006s) Memory: 1.0658 MB (Peak: 1.1167 MB) Data Comp: Zlib Server Time: 2024-05-21 05:34:15 UTC
Valid HTML 5 and Valid CSS