Home Forums Hunting & Shooting Long Range Hunting Does the 300 prc make the 338 edge obsolete???

Print Thread

Hop To

Re: Does the 6 GT make the 338 edge obsolete??? fredIII #14385117 12/18/19
Joined: Jan 2008 Posts: 17,343 Likes: 3 Durham, CA Higginez Campfire Ranger
Higginez Campfire Ranger Joined: Jan 2008 Posts: 17,343 Likes: 3 Durham, CA	A bit bummed to hear that about the 6.5 Staball. What primers were used? Local guy has some 26 although a bit spendy. Screw you! I'm voting for Trump again! Ecc 10:2 The heart of the wise inclines to the right, but that of a fool to the 24HCF.

GB1

Entire Thread
Title	Posted By	Posted
Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	bsa1917hunter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Calvin	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	Dogshooter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/06/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	jackmountain	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	tuff	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	tuff	12/20/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	bsa1917hunter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	10gaugemag	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Trystan	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	peeshooter	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Spotshooter	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	sdgunslinger	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	beretzs	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	3040HighWall	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	gitem_12	12/09/19
Re: Does the 300 prc make the 338 edge obsolete???	jeffbird	12/09/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	akmtnrunner	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	MontanaCreekHunter	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	kingston	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	smokepole	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	MontanaCreekHunter	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	kingston	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	JLimbo	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	fredIII	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	joshf303	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/13/19
Re: Does the 300 prc make the 30-30 win obsolete???	joshf303	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	tuff	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	3040HighWall	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	joshf303	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Bang head on rock make rock smaller!	fredIII	12/19/19
Re: Bang head on rock make rock smaller!	joshf303	12/19/19
Re: Bang head on rock make rock smaller!	Beaver10	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Higginez	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Higginez	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Spotshooter	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	joshf303	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	10gaugemag	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Sargejustice	12/31/19

Moderated by RickBin

Link Copied to Clipboard

AX24

533 members (1badf350, 2500HD, 1941USMC, 219 Wasp, 1lessdog, 1minute, 54 invisible), 2,459 guests, and 1,353 robots.

Key: Admin, Global Mod, Mod

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Statistics

Forums81

Topics1,193,901

Posts18,518,483

Members74,020

Most Online11,491
Jul 7th, 2023

Responsive Width:

PHP: 7.3.33 Page Time: 0.122s Queries: 17 (0.005s) Memory: 1.0642 MB (Peak: 1.1151 MB) Data Comp: Zlib Server Time: 2024-05-17 18:21:07 UTC
Valid HTML 5 and Valid CSS