Home Forums Hunting & Shooting Long Range Hunting Does the 300 prc make the 338 edge obsolete???

Print Thread

Hop To

Re: Does the 300 prc make the 338 edge obsolete??? Judman #14356976 12/09/19
Joined: Dec 2008 Posts: 21,228 Likes: 1 N.. Newaukum, Washington J Judman OP Campfire Ranger
OP Judman Campfire Ranger J Joined: Dec 2008 Posts: 21,228 Likes: 1 N.. Newaukum, Washington	Didn’t think there was that much difference between a .814 and a .777 to warrant longer barrels, heavier rifles, loudners, no factory ammo, no extended mag box, “on a 700”, more powder, noise and recoil, especially at 1000 yards!!! Wow Thanks for the info!! Ping pong balls for the win. Once you've wrestled everything else in life is easy. Dan Gable I keep my circle small, I’d rather have 4 quarters than 100 pennies. Ain’t easy havin pals.

GB1

Entire Thread
Title	Posted By	Posted
Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	bsa1917hunter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Calvin	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	Dogshooter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/06/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	jackmountain	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	tuff	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	tuff	12/20/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	bsa1917hunter	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	10gaugemag	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/02/19
Re: Does the 300 prc make the 338 edge obsolete???	Trystan	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	peeshooter	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Spotshooter	12/04/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	sdgunslinger	12/05/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	beretzs	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	3040HighWall	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	aalf	12/08/19
Re: Does the 300 prc make the 338 edge obsolete???	gitem_12	12/09/19
Re: Does the 300 prc make the 338 edge obsolete???	jeffbird	12/09/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	akmtnrunner	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	MontanaCreekHunter	12/10/19
Re: Does the 300 prc make the 338 edge obsolete???	kingston	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	smokepole	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	sherm_61	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	MontanaCreekHunter	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	kingston	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	JLimbo	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	fredIII	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/11/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Beaver10	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	joshf303	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/11/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/13/19
Re: Does the 300 prc make the 30-30 win obsolete???	joshf303	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	tuff	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	3040HighWall	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	joshf303	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 30-30 win obsolete???	Judman	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	Higginez	12/18/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Bang head on rock make rock smaller!	fredIII	12/19/19
Re: Bang head on rock make rock smaller!	joshf303	12/19/19
Re: Bang head on rock make rock smaller!	Beaver10	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Bang head on rock make rock smaller!	Judman	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Higginez	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Higginez	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	fredIII	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	Spotshooter	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	joshf303	12/19/19
Re: Does the 6 GT make the 338 edge obsolete???	10gaugemag	12/19/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Judman	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	79S	12/23/19
Re: Does the 300 prc make the 338 edge obsolete???	Sargejustice	12/31/19

Moderated by RickBin

Link Copied to Clipboard

AX24

622 members (1beaver_shooter, 160user, 1badf350, 10Glocks, 10gaugemag, 219 Wasp, 70 invisible), 2,734 guests, and 1,286 robots.

Key: Admin, Global Mod, Mod

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Statistics

Forums81

Topics1,193,830

Posts18,516,927

Members74,017

Most Online11,491
Jul 7th, 2023

Responsive Width:

PHP: 7.3.33 Page Time: 0.073s Queries: 17 (0.003s) Memory: 1.0646 MB (Peak: 1.1155 MB) Data Comp: Zlib Server Time: 2024-05-17 00:38:57 UTC
Valid HTML 5 and Valid CSS