Home Forums Gear Knives and Blades Blade Design for Big Game Hunting

I can’t remember who’s? One of you men ask me to remove 3/4 inch from the dumpling or boner. The short boner was born. Thank you to whoever! With either of those knives nothing is better in regards to best one knife tool. With full round 5.5 handle distal taper from both ends @.010.Meeting in the middle @ around .150 the knife will work for you while skinning. All things held in account 20+inch radius hollow grind that tapers from the bur to the spine is a must. As multi thermo cycles w/cryo. The icing on top would be a third temper cycle to relieve stress after the 400 grit grinding cycle. Which allows the tool to be stroped unless you get in hair or bone. All the consumer needs to learn is to skin from the inside out and he’s in business’s for life.

Point of interest
The sheath is as important as the tool. The “best” top grain leather thats been skived to proper thickness and firmness. Which the stitching lays below the surface. Kydex is wonderful stuff but scratches the [bleep] out of everything.

Rick menefee