These days I kill a lot of steel from 850 to 1000 every month. May through October... 1000 yard bench rest silhouette is my game.
I shoot two classes of rifles a 12 and 17 pound.
Running everything from a 6mm BRA. To a 300 SAUM.
This takes up most of my shooting efforts these days.
But 35 years ago.
I did alot of wood chuck hunting.
ALOT.
Back then it was pretty much all I did.
My first custom was built by Nelson Berger.Of marshallsville Ohio.
A 22 CHeetah on a 40x action.
I made those little buggers pay.
Running the Slow 1-16 twist and 52g Bergers I found it very effective out to 500 And I think my longest was right around 550.
Later I built a second CHeetah a much different set up built by Clarence Hammond of Red Lion PA.
This rifle was a full on BR rifle Stolle action McMillian BR stock and a Lilja 28 inch bull barrel. 1-15 twist.
I shot piles of chucks and did very well from 350 to 550.
One evening I pulled out my 1936 German Army
Barr and Stroud 250 meter baseline range finder... Yes the Brits sold them to Germany before the war .
660 yards is what it worked out to.
Not supposed to be able to get those light bullets to do that kind of stuff. But back then I didn't know what I didn't know..
These days if I had a peskie chuck that needed a bullet.
I'd just dig out a bench gun and letum have it.
Might use a Lazer

dave


[Linked Image]

Only accurate rifles are interesting.