I turned my Remington 700 in .223 into a 7TCU for this very application.

Went with a Remage setup using a Wilson barrel from Ragged Hole Barrels, #4 contour, 18" long and threaded for use with a suppressor. Stocky's fiberglass stock, which I am probably going to change out to a Stocky's VG2 stock sometime here in the near future. Kept the BDL arrangement, but replaced the .223 spacer in the mag box with a piece of 1/4" aluminum flat bar stock, cut to fit and epoxied in. Using the regular .223 follower, I can load out to over 2.550". My go to load is a 120 grain Nosler BT over 23.2 grains of H4198. I am probably going to have to find a new load soon as H4198 has disappeared.

I have changed out the scope since this picture to a Sightron S1 3-9X40.

[Linked Image]

[Linked Image]